EN ISO 15874-5:2013 PDF

Overview

EN ISO 15874-5:2013 - Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system - defines the required performance characteristics and test parameters for polypropylene piping systems used in building hot and cold water and heating installations. It applies to PP pipes, fittings, joints and to joints combining PP with other plastics or non‑plastic materials, across the service condition classes and design pressure/temperature classes referenced in ISO 15874‑1.

Key topics and technical requirements

• Fitness for purpose: Specifies the system‑level characteristics that joints and assemblies must demonstrate when tested under the specified conditions.
• Joint and assembly tests: Identifies mandatory tests for different jointing systems (socket welding, electrofusion, mechanical), including:
  • Internal pressure test (ISO 1167 series)
  • Bending test (EN 713)
  • Pull‑out test (EN 712)
  • Thermal cycling test (ISO 19893)
  • Pressure cycling test (ISO 19892)
  • Leak tightness under vacuum (EN 12294)
• Test parameters: Defines which test parameters and reference methods apply for each class of application and joint type (see ISO 1167 and relevant tables in the standard).
• Material compatibility: Requires intended combinations of PP types (for example, PP‑RCT with PP‑R fittings) to meet the material requirements and performance of the pipe material.
• Scope limits: Applies to system design pressures and temperatures as given in ISO 15874‑1; it does not itself determine suitability regarding drinking‑water quality or national regulatory requirements.

Practical applications

• Ensures that domestic water supply and building heating systems using PP piping meet demonstrable performance criteria for long‑term service.
• Used to validate joint reliability, pressure and thermal resistance, and leak tightness of assembled systems under realistic service cycles.
• Supports product development, type testing and certification for manufacturers of PP pipes, fittings and jointing systems.

Who should use this standard

• Manufacturers of PP pipes, fittings and jointing systems
• Test laboratories and certification bodies performing conformity assessments
• Specifiers, consultants and engineers who design plumbing and heating installations
• Procurement and regulatory authorities establishing compliance requirements for building installations

Related standards

• ISO 15874 series: Part 1 (General), Part 2 (Pipes), Part 3 (Fittings), Part 7 (Guidance for conformity)
• Related material standards: ISO 15875 (PE‑X), ISO 15876 (PB), ISO 15877 (PVC‑C), ISO 22391 (PE‑RT)
• Normative test methods referenced: ISO 1167‑1/2/3/4, EN 712, EN 713, ISO 19893, ISO 19892, EN 12294

Keywords: EN ISO 15874-5:2013, polypropylene (PP) piping systems, fitness for purpose, hot and cold water installations, internal pressure test, thermal cycling, joint testing.