EN ISO 17678:2019 PDF
Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides (ISO 17678:2019)
Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides (ISO 17678:2019)
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 32
- Дата публикации:
- 26 июня 2019 г.
- Издание:
- CEN EN 17678 edition 2 version 1
- ICS:
- 67.100.10
This document specifies a reference method for the determination of milk fat purity using gas chromatographic analysis of triglycerides. The method utilizes the differences in triglyceride fingerprint of milk fat from the individual triglyceride fingerprints of other fats and oils to determine samples which are outside the range normally observed for milk fat. This is achieved by using the defined triglyceride formulae based on the normalized weighted sum of individual triglyceride peaks which are sensitive to the integrity of the milk[6][7]. The integrity of the milk fat can be determined by comparing the result of these formulae with those previously observed for a range of pure milk fat samples[12]. Both vegetable fats and animal fats such as beef tallow and lard can be detected. The method is applicable to bulk milk, or products made thereof, irrespective of the variation in common feeding practices, breed or lactation conditions. In particular, the method is applicable to fat extracted from milk products purporting to contain pure milk fat with unchanged composition, such as butter, cream, milk and milk powder. Because a false-positive result can occur, the method does not apply to milk fat related to these circumstances: a) obtained from bovine milk other than cow's milk; b) obtained from single cows; c) obtained from cows whose diet contained a particularly high proportion of vegetable oils such as rapeseed, cotton or palm oil, etc.; d) obtained from cows suffering from serious underfeeding (strong energy deficit); e) obtained from colostrum; f) subjected to technological treatment such as removal of cholesterol or fractionation; g) obtained from skim milk, buttermilk or whey; h) obtained from cheeses showing increased lipolysis; i) extracted using the Gerber, Weibull?Berntrop or Schmid?Bondzynski?Ratzlaff methods, or that has been isolated using detergents (e.g. the Bureau of Dairy Industries method). With the extraction methods specified in i), substantial quantities of partial glycerides or phospholipids can pass into the fat phase. NOTE 1 In nature, butyric (n-butanoic) acid (C4) occurs exclusively in milk fat and enables quantitative estimations of low to moderate amounts of milk fat in vegetable and animal fats to be made. Due to the large variation of C4, for which the approximate content ranges from 3,1 % fat mass fraction to 3,8 % fat mass fraction, it is difficult to provide qualitative and quantitative information for foreign fat to pure milk fat ratios of up to 20 % mass fraction[11]. NOTE 2 In practice, quantitative results cannot be derived from the sterol content of vegetable fats, because they depend on production and processing conditions. Furthermore, the qualitative determination of foreign fat using sterols is ambiguous. NOTE 3 Due to special feeding practices such as those related to c) and d), false-positive results have sometimes been reported for milk from certain Asian regions[15]. Moreover, grass-only diets such as mountain and, in particular, highland pasture feeding sometimes cause false-positive results, which can be substantiated by a content of conjugated linoleic acid (C18:2 c9t11) of ≥ 1,3 % fatty acid mass fraction[16][17]. Nevertheless, results conforming to the criteria of milk fat purity specified in this document are accepted, even if samples were undoubtedly produced under conditions reported in this note, including those described in h). NOTE 4 In ca
Abstract
Overview
EN ISO 17678:2019 - "Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides" - is a CEN-adopted reference method (ISO/IDF) for verifying the purity of milk fat. The standard uses gas chromatographic (GC) triglyceride fingerprinting to distinguish true milk fat from added or blended vegetable fats and animal fats (e.g., beef tallow, lard). It is intended for bulk milk and milk-derived products (butter, cream, milk, milk powder) and replaces EN ISO 17678:2010.
Key topics and technical requirements
- Principle: compare the sample’s triglyceride fingerprint to a database of pure milk fat profiles using defined triglyceride formulae (normalized weighted sums) and S‑values to detect deviations.
- Scope & limitations: applicable to fats from cow’s milk and common production conditions; however, the method does not apply where false positives are likely (e.g., milk from non-cow bovines, single-cow samples, colostrum, cows fed unusually high vegetable oil diets, severe underfeeding, technological treatments like fractionation or cholesterol removal, skim milk/whey-derived fat, cheeses with increased lipolysis, or fats extracted by Gerber / Weibull–Berntrop / Schmid–Bondzynski–Ratzlaff methods or detergents).
- Sample preparation & extraction: procedures are specified for isolating fat from butter/butteroil, milk (including silica‑gel column extraction), cheese and Röse–Gottlieb extraction.
- GC analysis: requirements include injection technique, baseline control, calibration, chromatographic conditions and triglyceride peak integration.
- Data evaluation: calculation and expression of triglyceride composition, S‑values, detection criteria for foreign fats, and handling of potential false positives.
- Performance and validation: interlaboratory test data, repeatability and reproducibility figures, and guidance on uncertainty of measurement (annexes cover column packing, quantification of foreign fat, uncertainty and interlaboratory results).
Applications and users
- Dairy quality control laboratories verifying purity of butter, cream, milk powder and other milk‑fat products.
- Regulatory and food control authorities investigating adulteration or fraud involving replacement of milk fat with vegetable or animal fats.
- Food manufacturers and ingredient suppliers ensuring supply-chain integrity and label compliance.
- Analytical service providers and research labs working on milk‑fat composition, authenticity testing and method validation.
Practical keywords: EN ISO 17678:2019, milk fat purity, gas chromatographic analysis, triglyceride fingerprint, detection of foreign fats, butter authenticity, Röse–Gottlieb, S‑values.
Related standards
- This document is an ISO/IDF joint standard and supersedes EN ISO 17678:2010.
- The standard notes that sterol‑based approaches are ambiguous for quantifying foreign fats and that butyric acid (C4) is characteristic of milk fat (approx. 3.1–3.8% fat mass fraction) but variable, limiting its standalone use for quantification.
Технические детали
- Технический комитет
- CEN/TC 302 - Milk and milk products - Methods of sampling and analysis
- SKU
- EN ISO 17678:2019
Похожие стандарты
Упомянутые в описании и другие стандарты EN
ISO 17678:2019
ДействующийMilk and milk products — Determination of milk fat purity by gas chromatographic analysis of triglycerides
Overview ISO 17678:2019 - Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides - is a joint ISO/IDF reference method (second edition, 2019) for a…
ISO 17678:2010
ОтменёнMilk and milk products — Determination of milk fat purity by gas chromatographic analysis of triglycerides (R…
EN ISO 6599-1:2026
ДействующийPackaging - Conditioning for testing - Part 1: Paper sacks (ISO 6599-1:2026)
Overview EN ISO 6599-1:2026 - Packaging - Conditioning for testing - Part 1: Paper sacks is a key international standard developed by CEN and ISO. This document defines the conditioning atmospheres a…
EN ISO 4885:2026
ДействующийFerrous materials - Heat treatments - Vocabulary (ISO 4885:2026)
Overview EN ISO 4885:2026 - Ferrous Materials – Heat Treatments – Vocabulary is an international standard developed by CEN, aligning with ISO 4885:2026. This document provides comprehensive definitio…
EN ISO/IEC 29151:2026
ДействующийInformation security, cybersecurity and privacy protection - Controls, requirements, and guidance for persona…
Overview EN ISO/IEC 29151:2026 specifies controls, requirements, and guidance to ensure the proper protection of personally identifiable information (PII) within the fields of information security, c…
EN ISO 9693:2026
ДействующийDentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems (ISO 9693:2026)
Overview EN ISO 9693:2026 - Dentistry: Compatibility Testing for Metal-Ceramic and Ceramic-Ceramic Systems establishes internationally recognized requirements and test methods for evaluating the ther…
EN ISO 26082-1:2026
ДействующийLeather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale…
Overview EN ISO 26082-1:2026 is a European standard titled "Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale) method" adopted by CEN. This…
EN ISO/IEEE 11073-10101:2020/A1:2026
ДействующийHealth informatics - Device interoperability - Part 10101: Point-of-care medical device communication - Nomen…
Overview EN ISO/IEEE 11073-10101:2020/A1:2026 is an amendment to the internationally recognized standard for health informatics and device interoperability, focusing specifically on the nomenclature…