EN ISO 17706:2018 PDF

Name: EN ISO 17706:2018 — Footwear - Test methods for uppers - Tensile strength and elongation (ISO 17706:2003)
SKU: EN ISO 17706:2018
Price: 60.09 EUR
Availability: InStock

Footwear - Test methods for uppers - Tensile strength and elongation (ISO 17706:2003)

Название (английский):

EN ISO 17706:2018

Footwear - Test methods for uppers - Tensile strength and elongation (ISO 17706:2003)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 14
Дата публикации:: 10 октября 2018 г.
Издание:: CEN EN 17706 edition 1 version 1
ICS:: 61.060

Тип поставки:

Full version210 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:210 €

Описание (английский):

ISO 17706:2003 specifies a test method for determining the force required to break a test specimen from uppers irrespective of the material, in order to asses the suitability for the end use.

Abstract

Overview - EN ISO 17706:2018 (Footwear uppers tensile test)

Key topics and technical requirements

Scope: Uppers including complete upper assemblies (visible outer materials); excludes toe puffs and stiffeners.
Specimen geometry:
- Length: 160 mm ± 10 mm.
- Width: materials that can fray - cut to 35 mm ± 2 mm, then remove threads to reduce to 25.0 mm ± 0.5 mm; non-fraying materials - 25 mm ± 0.5 mm.
- Six specimens: three along (longitudinal) and three across (transverse) the material.
Conditioning and sampling:
- Avoid seams/perforations when cutting specimens.
- Condition specimens in a standard atmosphere per EN 12222 for at least 48 hours before testing.
- For leather sampling, refer to prEN 12987 for butt/side selection and backbone direction.
Apparatus:
- Tensile testing machine with jaw separation rate 100 mm/min ± 5 mm/min and initial jaw gap 100 mm ± 1 mm.
- Force-measuring accuracy better than 2% (machine class 2 per EN ISO 7500‑1). Typical force ranges: <1 kN for textiles/coated textiles; up to ~5 kN for thick leather (>2 mm).
- Cutting tool (press knife), and distance measuring device (accuracy 0.5 mm).
Test procedure & acceptance:
- Clamp specimen with 100 mm gauge length; pull until failure.
- Reject results if specimen slips >2 mm in jaws or fails within 5 mm of a jaw (with exceptions noted).
- Record breaking force (F) and elongation at break (E).
Calculations:
- Breaking strength = F (N) / specimen width (mm) → N/mm.
- Tensile elongation (%) = (E / GL) × 100, where GL is initial jaw separation (mm).
Reporting: Include mean breaking strength and mean tensile elongation for each test direction plus test conditions and specimen details.

Applications - who uses this standard

Footwear manufacturers and component suppliers for material selection and quality control.
Independent testing laboratories for compliance and comparative performance testing.
Product development and R&D teams evaluating new upper materials or constructions.
Procurement and specification writers who require objective tensile strength/elongation data.

Related standards

EN 12222 - standard atmospheres for conditioning/testing footwear.
EN ISO 7500‑1 - verification/calibration of tensile testing machines.
EN 13400 - sampling location and conditioning of samples.
prEN 12987 - leather sampling guidance.
ISO 17706:2003 - original international text adopted as EN ISO 17706:2018.

Keywords: EN ISO 17706:2018, footwear, uppers, tensile strength, elongation, test method, breaking strength, tensile testing machine, conditioning, sampling.

Технические детали

Технический комитет: CEN/TC 309 - Footwear
SKU: EN ISO 17706:2018

Главная

Каталог

ISO 17706:2003

Действующий

Footwear — Test methods for uppers — Tensile strength and elongation

Overview ISO 17706:2003 is an internationally recognized standard specifying test methods for footwear uppers, focusing on tensile strength and elongation. This standard provides a reliable procedure…

5 · PDF

25 €

SIST EN ISO 7500-1:2018

Действующий

Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compr…

Overview EN ISO 7500-1:2018 - "Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of t…

25 · PDF

74 €

EN ISO 6599-1:2026

Действующий

Packaging - Conditioning for testing - Part 1: Paper sacks (ISO 6599-1:2026)

Overview EN ISO 6599-1:2026 - Packaging - Conditioning for testing - Part 1: Paper sacks is a key international standard developed by CEN and ISO. This document defines the conditioning atmospheres a…

8 · PDF

44 €

EN ISO 4885:2026

Действующий

Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2026)

Overview EN ISO 4885:2026 - Ferrous Materials – Heat Treatments – Vocabulary is an international standard developed by CEN, aligning with ISO 4885:2026. This document provides comprehensive definitio…

66 · PDF

115 €

EN ISO/IEC 29151:2026

Действующий

Information security, cybersecurity and privacy protection - Controls, requirements, and guidance for persona…

Overview EN ISO/IEC 29151:2026 specifies controls, requirements, and guidance to ensure the proper protection of personally identifiable information (PII) within the fields of information security, c…

54 · PDF

109 €

EN ISO 9693:2026

Действующий

Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems (ISO 9693:2026)

Overview EN ISO 9693:2026 - Dentistry: Compatibility Testing for Metal-Ceramic and Ceramic-Ceramic Systems establishes internationally recognized requirements and test methods for evaluating the ther…

15 · PDF

60 €

EN ISO 26082-1:2026

Действующий

Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale…

Overview EN ISO 26082-1:2026 is a European standard titled "Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale) method" adopted by CEN. This…

12 · PDF

52 €

EN ISO/IEEE 11073-10101:2020/A1:2026

Действующий

Health informatics - Device interoperability - Part 10101: Point-of-care medical device communication - Nomen…

Overview EN ISO/IEEE 11073-10101:2020/A1:2026 is an amendment to the internationally recognized standard for health informatics and device interoperability, focusing specifically on the nomenclature…

305 · PDF

220 €

EN ISO 17706:2018 PDF

Abstract

Overview - EN ISO 17706:2018 (Footwear uppers tensile test)

Похожие стандарты

Key topics and technical requirements

Applications - who uses this standard

Related standards

Технические детали

ISO 17706:2003

Footwear — Test methods for uppers — Tensile strength and elongation

SIST EN ISO 7500-1:2018

Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compr…

EN ISO 6599-1:2026

Packaging - Conditioning for testing - Part 1: Paper sacks (ISO 6599-1:2026)

EN ISO 4885:2026

Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2026)

EN ISO/IEC 29151:2026

Information security, cybersecurity and privacy protection - Controls, requirements, and guidance for persona…

EN ISO 9693:2026

Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems (ISO 9693:2026)

EN ISO 26082-1:2026

Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale…

EN ISO/IEEE 11073-10101:2020/A1:2026

Health informatics - Device interoperability - Part 10101: Point-of-care medical device communication - Nomen…