EN ISO 20823:2003 PDF

Overview

EN ISO 20823:2003 (ISO 20823:2003) defines the manifold ignition test for determining the flammability characteristics of petroleum-related fluids when they contact hot metal surfaces. The method measures relative resistance to ignition - primarily for fire‑resistant hydraulic fluids - by dispensing a controlled test portion onto a heated simulated manifold and observing flash or sustained burning. The procedure can also be used to gauge ignition temperatures by changing the manifold temperature, but doing so for more flammable fluids increases hazard.

Key topics and technical requirements

• Test principle: A 10 ml test portion is dispensed onto a heated tube and the spray is observed for flash or burning on the tube and in the drip tray.
• Standard test temperature: Manifold surface nominally at 700 °C ± 5 °C (other temperatures may be used to determine ignition points).
• Dispensing: 10 ml ± 0.5 ml delivered at a controlled rate so the portion is expelled in 40–60 s from a dispenser mounted 300 mm above the tube (height recorded to nearest 5 mm).
• Apparatus: Simulated manifold (corrosion‑resistant steel tube ~75 mm OD, sandblasted), internal heater, temperature sensors in contact with the tube, ventilated fire‑resistant enclosure, and a drip tray.
• Preparation and safety: Tube cleaning with steel wool and solvent; samples mixed per ISO 3170 sampling guidance. The standard includes a clear safety warning - testing may involve hazardous materials and operations; appropriate ventilation and safety controls are required.
• Result categories:
  • I(T) - flashes or burns on the tube only (does not continue burning in tray)
  • I(D) - flashes/burns and continues to burn in the tray
  • N - no flash or burn (may be reported as “pass”)
• Repeatability: Three tests at different positions (≥50 mm apart) on the same cleaned tube; laboratories should implement internal quality‑control procedures because conventional precision statistics are not specified.

Applications and users

• Practical use: Assessing ignition resistance of fire‑resistant hydraulic fluids, supporting product development, safety assessments, material selection and regulatory compliance where hot‑surface ignition risk is a concern.
• Who uses it:
  • Third‑party test laboratories and certification bodies
  • Hydraulic fluid manufacturers and R&D teams
  • Safety and reliability engineers in industrial, aerospace, and marine sectors
  • Procurement and quality managers specifying fluids for equipment exposed to hot surfaces
• Caution: Use with more flammable fluids is possible at lower manifold temperatures but significantly increases hazard and requires extra controls.

Related standards

• ISO 3170 - Petroleum liquids - Manual sampling (referenced for sampling)
• ISO 12922:1999 - Lubricants and hydraulic systems (procedure reference for family H fluids)
• Prepared under ISO/TC 28 (Petroleum products and lubricants)

EN ISO 20823:2003 provides a practical, standardized method to evaluate hot‑surface ignitability of hydraulic and related fluids, enabling informed safety decisions and product comparison when managing fire risks from fluids contacting hot metal surfaces.