EN ISO 21587-1:2007 PDF

Overview

EN ISO 21587-1:2007 (CEN adoption of ISO 21587-1:2007) defines the apparatus, reagents, dissolution procedures and gravimetric silica determination used in the chemical analysis of aluminosilicate refractory products and raw materials. It provides a wet-chemical alternative to X-ray fluorescence (XRF) methods (see ISO 12677:2003) and forms Part 1 of the ISO 21587 series. The standard complements Parts 2 (wet chemical analysis) and 3 (ICP and atomic absorption spectrometry).

Key topics and requirements

• Scope and purpose: Specifies reagents, dissolution techniques and the gravimetric method for SiO2 determination as part of alternative chemical analysis routes for aluminosilicate refractories.
• Reagents and standard solutions: Detailed preparation and standardization procedures for key reagents and calibration standards, including:
  • CyDTA and EDTA volumetric solutions for complexometric titrations.
  • Zinc standard solutions (0.05 and 0.02 mol/l) for standardization.
  • Standard oxide solutions for Al2O3, CaO, Cr2O3, Fe2O3, MgO, MnO, P2O5, K2O and others at defined concentrations (typically 1 mg/ml and specified dilutions).
• Dissolution procedures: Guidance on sample dissolution prior to analysis (acid treatments and controlled heating as necessary) to ensure quantitative recovery of analytes for subsequent determination.
• Gravimetric silica determination: Procedures for isolating and weighing silicon(IV) oxide (SiO2) by gravimetric techniques as the primary SiO2 quantification route in this part.
• Normative references and quality framework: References ISO 21587-2, ISO 21587-3 and ISO 26845 (general requirements for wet chemical, AAS and ICP methods) for method validation, calibration and laboratory practice.

Applications and users

Who benefits from EN ISO 21587-1:2007:

• Refractory manufacturers conducting raw-material acceptance and product quality control.
• Analytical laboratories performing accredited chemical analyses as alternatives to XRF.
• Materials scientists and R&D teams needing reliable SiO2 and oxide composition data for aluminosilicate products.
• Quality assurance and compliance officers ensuring consistent test methodology across plants and countries.

Practical uses:

• Routine QC of bricks, monolithics and raw refractories.
• Verification of XRF results or where XRF is unavailable.
• Support for compositional control in production, failure analysis and specification compliance.

Related standards

• ISO 21587-2: Wet chemical analysis (complementary procedures)
• ISO 21587-3: ICP and atomic absorption spectrometry methods
• ISO 12677:2003: XRF fused-bead method (reference XRF method)
• ISO 26845: General requirements for wet chemical, AAS and ICP methods

Keywords: EN ISO 21587-1:2007, aluminosilicate refractory, chemical analysis, gravimetric silica, reagents, dissolution, XRF alternative, refractory quality control.