EN ISO 22282-6:2012 PDF

Name: EN ISO 22282-6:2012 — Geotechnical investigation and testing - Geohydraulic testing - Part 6: Water permeability tests in a borehole using closed systems (ISO 22282-6:2012)
SKU: EN ISO 22282-6:2012
Price: 73.76 EUR
Availability: InStock

Geotechnical investigation and testing - Geohydraulic testing - Part 6: Water permeability tests in a borehole using closed systems (ISO 22282-6:2012)

Название (английский):

EN ISO 22282-6:2012

Geotechnical investigation and testing - Geohydraulic testing - Part 6: Water permeability tests in a borehole using closed systems (ISO 22282-6:2012)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 21
Дата публикации:: 1 июня 2012 г.
Издание:: CEN EN 22282 edition 1 version 1
ICS:: 93.020

Тип поставки:

Full version315 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:4 раб. дн. (перевод)

Цена:315 €

Описание (английский):

ISO 22282-6:2012 specifies requirements for the determination of the local permeability in soils and rocks below or above the groundwater table in a closed system by the water permeability tests as part of the geotechnical investigation services according to EN 1997-1 and EN 1997-2.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 22282-6:2012 - "Geotechnical investigation and testing - Geohydraulic testing - Part 6" specifies procedures for performing water permeability tests in a borehole using closed systems. The standard defines how to determine local hydraulic properties in soils and rocks (above or below the groundwater table) as part of geotechnical investigation services referenced in EN 1997-1 and EN 1997-2. Tests are based on applying an instantaneous change in hydraulic head in a sealed borehole interval and recording pressure dissipation with time.

Key topics and technical requirements

Test principle: closed-system pressure (pulse) test where an isolated test section is subjected to a sudden head change and pressure dissipation Δp(t) is recorded.

Measured outputs: pressure vs. time curves, variation of volume at pressure application, and system compressibility values used for interpretation.

Hydraulic parameters: determination of permeability coefficient (k); tests can also be used to estimate transmissivity (T) and storage coefficient (S).

Equipment: pump or pressure source, pipes and tubing, single/double inflatable packers or sealing plugs, isolating valve(s), pressure and temperature sensors, data acquisition system and volume-measuring device.

Test execution:

Install tubing and packers; establish pre-test stabilized hydraulic head (different procedures for below and above groundwater table).
For unsaturated tests, a saturation phase is required before the pulse application.
Apply a controlled pressure pulse (limits to avoid hydraulic fracturing) and record pressure at high frequency (the standard notes measurements every second).
Record initial and final compressibility checks and log ΔV/Δp for the system.

Reporting: detailed field and test reports are required, including equipment, test geometry, borehole data, groundwater level, test pressure-time records, saturation duration (if applicable), and operator details.

Applications and users

Practical uses: site investigation for foundation design, underground works, earthworks, groundwater flow characterization, and input to geotechnical design calculations where local permeability of low-permeability soils or rock is critical.

Typical users: geotechnical engineers, hydrogeologists, site investigation contractors, geotechnical laboratories, consultants and regulatory authorities involved in geohydraulic testing and subsurface characterization.

Related standards (if applicable)

ISO 22282 series (Part 1: General rules; Part 2: open systems; Part 3: water pressure tests in rock; Part 4: pumping tests; Part 5: infiltrometer tests)

ISO 22475-1 (sampling and groundwater measurements)

ISO 14688-1, ISO 14689-1 (soil and rock identification/classification)

EN 1997‑1 / EN 1997‑2 (geotechnical design and investigation requirements)

Keywords: geotechnical investigation, water permeability tests, closed systems, borehole testing, permeability coefficient, transmissivity, EN ISO 22282-6:2012, geohydraulic testing.

EN ISO 22282-6:2012 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards (if applicable)

Технические детали

ISO 22282-6:2012

Geotechnical investigation and testing — Geohydraulic testing — Part 6: Water permeability tests in a borehol…

BS EN ISO 22282-1:2012

Geotechnical investigation and testing. Geohydraulic testing. General rules.

ISO 22475-1:2021

Geotechnical investigation and testing — Sampling methods and groundwater measurements — Part 1: Technical pr…

SIST EN ISO 14688-1:2018

Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification a…

ISO 14689-1:2003

Geotechnical investigation and testing — Identification and classification of rock — Part 1: Identification a…