EN ISO 22553-3:2020 PDF

Overview

EN ISO 22553-3:2020 - Paints and varnishes - Electro-deposition coatings - Part 3: Compatibility of electro‑deposition coating materials with a reference oil - specifies a laboratory test method to determine whether electro‑deposition (e‑coat) materials are compatible with a defined reference oil. The standard is applicable to automotive and general industrial electro‑deposition coatings (examples: chiller units, consumer products, radiators, aerospace, agriculture). The method assesses how surface‑active contaminants (oils, lubricants) affect the appearance and performance of e‑coats.

Key topics and technical requirements

• Scope & purpose: Determine compatibility of e‑coat formulations with a reference oil to identify potential surface defects induced by contamination.
• Principle: Coat standard test panels with the electro‑deposition material, contaminate the bath with a reference oil mixture, produce additional panels, then visually evaluate the stoved films.
• Apparatus & materials:
  • Laboratory deposition system with tank recirculation and DC power (schematic provided).
  • Electrically conductive test panels (≈190 × 105 × 0.75 mm) with pretreatment per ISO 1514.
  • Film thickness gauge (max error 0.1 µm), controlled oven, pipette (1 µl accuracy), thermometer, timer, stirrer.
• Reagents & dosing:
  • Butyl glycol (technically pure) and the specified reference oil.
  • Preparation: mix 10 ml reference oil + 90 ml butyl glycol; add 2.5 ml of that mix to 5 L e‑coat bath; homogenize for 24 h (stirring ~500 min‑1).
• Procedure essentials:
  • Blank test (uncontaminated bath) and contaminated test under controlled bath temperature and deposition voltage/time set to target dry film thickness.
  • Rinse with demineralized water (ISO 23321) and oven‑stove per product specification.
• Evaluation & reporting: Visual assessment of stoved coatings (see ISO 13076 for lighting/visual procedure); triplicate determinations recommended; results and test conditions documented in the test report.

Practical applications and users

• Who uses it:
  • Coating formulators and R&D labs validating new electro‑deposition formulations.
  • Quality control and failure‑analysis teams in automotive OEMs and tier suppliers.
  • Surface‑treatment contractors and industrial coating manufacturers.
• Practical value:
  • Predict and prevent surface defects caused by oil contamination in production tanks.
  • Support supplier qualification, incoming inspection, and process control to reduce rework and corrosion risks.

Related standards

• ISO 22553 series (see Parts 1 and 4 for vocabulary and compatibility with other contaminants)
• ISO 1514 (standard panels), ISO 2808 (film thickness), ISO 4618 (terms), ISO 13076 (visual assessment), ISO 23321 (demineralized water)

Keywords: EN ISO 22553-3:2020, electro-deposition coatings, compatibility test, reference oil, paints and varnishes, e-coat.