EN ISO 23145-2:2016 PDF

Name: EN ISO 23145-2:2016 — Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012)
SKU: EN ISO 23145-2:2016
Price: 60.09 EUR
Availability: InStock

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012)

Название (английский):

EN ISO 23145-2:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 14
Дата публикации:: 20 апреля 2016 г.
Издание:: CEN EN 23145 edition 2 version 1
ICS:: 81.060.30

Тип поставки:

Full version210 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:210 €

Описание (английский):

This part of ISO 23145 specifies the test method to determine the untapped density of granulated or ungranulated ceramic powders by a constant-volume measuring method.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview - EN ISO 23145-2:2016 (ISO 23145-2:2012)

EN ISO 23145-2:2016 specifies a laboratory test method for determining the untapped (un-tapped) bulk density of ceramic powders (granulated or ungranulated) using a constant‑volume measuring method. It forms Part 2 of ISO 23145 (Part 1 covers tap density) and is intended for fine/advanced/technical ceramics where accurate powder bulk density data are needed for materials characterization and quality control.

Key topics & technical requirements

Scope: Untapped density of ceramic powders measured by allowing powder to fall freely into a fixed-volume container without vibration.

Principle: Measure mass of a known constant volume of powder after free-fall filling; density = mass / volume.

Apparatus essentials:

Funnels with orifice diameters 2.5 mm and 5.0 mm (stainless steel, non‑magnetic).
Cylindrical container of 100 cm3 volume and diameter:height ≈ 1.
Sieve per ISO 565 with 0.71 mm aperture.
Balance precision 0.1 g (or 0.01 g for very fluffy powders).
Straight edge for levelling and a vibration‑free stand.

Sampling & pretreatment: Test as‑received unless drying is required. If dried, heating at (110 ± 5) °C for ≥1 h is recommended and drying actions must be recorded.

Procedure highlights:

Pass powder through sieve, fill funnel, allow free flow into container, level with straight edge without compression or vibration, tap lightly to avoid spillage, weigh container + powder.
Perform three test portions and average results.

Calculation & reporting:

Untapped density p = (m1 − m0) / V (masses in g, V in cm3). Round to 0.001 g/cm3 (or 1 kg/m3) per ISO 80000‑1.
Test report must follow ISO/IEC 17025 requirements and include sample ID, environmental conditions, any pretreatment, results and any anomalies (e.g., orifice blockage, powder poking).

Applications - who uses this standard

Ceramic materials laboratories, R&D and quality control teams in advanced ceramics manufacturing.

Powder suppliers and formulators for specification, acceptance testing and batch control.

Process engineers and product developers using bulk density for powder handling, compaction, mixing, spray drying and sintering process design.

Third‑party testing laboratories seeking accredited, repeatable methods.

Related standards & references

ISO 23145‑1 (Tap density)

ISO 565 (Test sieves)

ISO 80000‑1 (Quantities and units)

ISO/IEC 17025 (Laboratory competence)

Historical/related methods: EN 725‑9, JIS and ASTM powder density test methods

Keywords: EN ISO 23145-2:2016, untapped density, bulk density of ceramic powders, fine ceramics, powder characterization, constant-volume method.

EN ISO 23145-2:2016 PDF

Abstract

Похожие стандарты

Overview - EN ISO 23145-2:2016 (ISO 23145-2:2012)

Key topics & technical requirements

Applications - who uses this standard

Related standards & references

Технические детали

ISO 23145-2:2012

Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of bulk density of ceramic pow…

SIST EN ISO 23145-2:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic pow…

ISO 5658-2:2006/Amd 1:2011

Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building and transport products in verti…

SIST EN ISO 80000-11:2020/A1:2026

Quantities and units - Part 11: Characteristic numbers - Amendment 1 (ISO 80000-11:2019/Amd 1:2025)

ISO 6141:2015/Amd 1:2020

Gas analysis — Contents of certificates for calibration gas mixtures — Amendment 1: Cross reference list to I…

SIST EN ISO 23145-1:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic pow…