Overview
EN ISO 28079:2026 – Hardmetals – Palmqvist toughness test (ISO 28079:2026) is an internationally recognized standard developed by CEN and ISO for measuring the Palmqvist toughness of hardmetals and cermets, such as cemented carbides and metal-bonded carbonitrides. The method utilizes a Vickers hardness indentation to assess the toughness of these materials at ambient temperatures. The Palmqvist toughness is calculated from the total length of cracks emanating from the corners of the Vickers indent, providing a practical means of characterizing the fracture resistance of hard materials used in demanding industrial applications.
This standard specifies detailed test procedures, sample preparation methods, apparatus requirements, and reporting instructions, ensuring reproducible and reliable toughness measurements in a laboratory setting. The document is not intended for use in corrosive environments such as strong acids or seawater.
Key Topics
- Palmqvist Toughness Measurement: Defined as the total crack length from the corners of a Vickers hardness indentation, this test is widely used for hardmetals and cermets to quantify toughness.
- Applicability: Designed for metal-bonded carbides, carbonitrides (hardmetals), and cermets, typically prepared as flat samples for indentation.
- Test Procedure:
- Indentation using calibrated Vickers hardness testers, following ISO 6507 series.
- Optical measurement of crack lengths at high magnification.
- Calculation methodology for both Palmqvist toughness and related fracture mechanics values.
- Sample Preparation:
- Emphasis on precision: flat, polished (and optionally annealed) surfaces.
- Standardized surface preparation reduces error and ensures comparability.
- Measurement Environment: Ambient laboratory air; not suitable for aggressive chemical exposure.
- Reporting:
- Comprehensive documentation of material details, test conditions, and results.
- Requires reporting of both the methodology and any deviations from standard procedures.
- Uncertainty and Validity: Guidance on maintaining reliable results, addressing sources of measurement uncertainty, and ensuring test validity.
Applications
The Palmqvist toughness test under EN ISO 28079:2026 is crucial for:
- Quality Control: Manufacturers of hardmetals and cermet products use this standard to monitor material consistency and performance, particularly in the tooling and cutting industries.
- Material Selection: Designers and engineers compare toughness across different grades of cemented carbides and cermets for optimal product development.
- Product Design and Assessment: Provides suitability data for wear-resistant components in mining, machining, and other high-stress environments.
- Research and Development: Laboratories involved in the development of new hardmetal compositions or processing methods use the standard to objectively compare fracture resistance.
- Failure Analysis: Identifying root causes of microcracking and premature failure in service.
Related Standards
When implementing EN ISO 28079:2026, consider the following related standards and documents:
- ISO 6507-1, ISO 6507-2, ISO 6507-3: Standards for the Vickers hardness test, essential for correct indentation and calibration procedures.
- ISO 3252: Powder metallurgy vocabulary, supporting correct terminology.
- ISO/TC 119: Powder metallurgy standards, covering additional methods for sampling and testing hardmetals.
- Quality Management Standards: Such as ISO 9001, to support procedural consistency.
By adopting EN ISO 28079:2026, organizations enhance the reliability and comparability of toughness measurements across the hardmetals industry, supporting innovation, quality assurance, and international trade.