EN ISO 2812-4:2017 PDF

Overview

EN ISO 2812-4:2017 - Paints and varnishes: Determination of resistance to liquids - Part 4: Spotting methods specifies standardized spot-test procedures to assess how single- or multi-layer coating systems resist contact with liquids or paste‑like substances. The standard describes test principles, required apparatus, sample preparation, two practical spotting methods (horizontal and inclined), conditioning and evaluation steps, and reporting requirements. It is part of the ISO 2812 series and is adopted by CEN for use across European national standards bodies.

Keywords: EN ISO 2812-4:2017, spotting methods, resistance to liquids, coatings testing, paint test, liquid resistance.

Key topics and requirements

• Scope and purpose: Determines the effect of liquids/pastes on coatings and, where relevant, assesses substrate damage.
• Test principle: Apply controlled droplets or spots of test substance on coated panels, confine them, condition, then evaluate changes.
• Apparatus & materials: Typical lab equipment - pipette (~0.1 ml droplet), 50 ml burette, 60 mm Petri dishes, collecting vessel for inclined tests.
• Test panels: Standard panels (approx. 150 × 100 mm; 0.7–1.0 mm thick) prepared and coated per ISO 1514; dry film thickness measured per ISO 2808.
• Conditioning & environment: Condition panels ≥16 h at (23 ± 2) °C and (50 ± 5) % RH; perform tests at (23 ± 2) °C (ISO 3270).
• Two methods:
  • Method A - Horizontal panel: Apply droplets or ~0.5 cm paste, cover with Petri dishes; perform duplicate tests.
  • Method B - Inclined panel: Panel at 30°; apply droplets at 1–2 s intervals for 10 min so liquid flows; perform duplicate tests.
• Evaluation: Clean residues, assess exposed area only, evaluate blistering (ISO 4628-2) and visible alterations (ISO 4628-1); optionally perform further tests (cross-cut, hardness). Reassess after 24 h; repeat duplicates if inconsistent.
• Reporting: Record test conditions, substances, panel preparation, results and any repeat determinations.

Applications and users

• Quality control laboratories verifying product performance against chemical or cleaning fluids.
• Coatings formulators and R&D teams screening formulations for resistance to oils, solvents, acids, alkalis, cleaning agents and paste-like contaminants.
• Specifiers, certifiers and procurement teams defining performance requirements for industrial, architectural or protective coatings.
• Independent test houses performing contract testing for manufacturers and end‑users.

Keywords: coatings durability, paint resistance testing, spot test, quality control, coatings R&D.

Related standards

• ISO 1513 - Sample preparation
• ISO 1514 - Standard test panels
• ISO 2808 - Film thickness measurement
• ISO 3270 - Conditioning temperatures/humidities
• ISO 4618 - Terms and definitions
• ISO 4628-1 / ISO 4628-2 - Evaluation of degradation (visual scoring)
• ISO 15528 - Sampling

Use EN ISO 2812-4:2017 when you need a reproducible, widely accepted spot-testing method for assessing how coatings withstand localized liquid exposure.