EN ISO 3650:1998 PDF

Name: EN ISO 3650:1998 — Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998)
SKU: EN ISO 3650:1998
Price: 65.56 EUR
Availability: InStock

Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998)

Название (английский):

EN ISO 3650:1998

Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 18
Дата публикации:: 15 декабря 1998 г.
Издание:: CEN EN 3650 edition 1 version 1
ICS:: 17.040.30

Тип поставки:

Full version270 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:270 €

Описание (английский):

This International Standard specifies the most important design and metrological characteristics of gauge blocks with a rectangular cross section and a nominal length ln ranging from 0,5 mm to 1000 mm. Limit deviations and tolerances are stated for the calibration grade K and for the grades 0, 1 and 2 for various measuring purposes.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 3650:1998 - Geometrical product specifications (GPS) - Length standards - Gauge blocks defines the principal design and metrological characteristics for rectangular gauge blocks with nominal lengths from 0.5 mm to 1000 mm. It specifies limit deviations and tolerances for the calibration grade K and for grades 0, 1 and 2, and sets the measurement basis and traceability requirements that make gauge blocks suitable as primary length standards.

Key topics and technical requirements

Scope and definitions: clear definitions for terms such as gauge block, central length, variation in length, flatness deviation and wringing.

Metrological basis & traceability:

Unit of length tied to the metre (SI definition).
Traceability chain required to national/international length standards; interferometric calibration is the reference method.
Reference conditions: 20 °C (ISO 1) and standard pressure 101 325 Pa.

Reference orientation:

For blocks ≤ 100 mm: vertical orientation (measuring faces horizontal).
For blocks > 100 mm: horizontal orientation with specified support positions (supports at 0.211 × nominal length from ends).

Material & thermal properties:

Made of hardened steel or similarly wear‑resistant materials capable of wringing.
Steel coefficient of thermal expansion specified for 10 °C–30 °C (document: (11.5 ± 1.0) × 10^-6 K^-1); values and uncertainties for non‑steel materials must be supplied.

Geometrical tolerances & faces:

Requirements for flatness, parallelism, perpendicularity, side-face geometry and edge conditions.
Wringing behaviour and surface finish requirements to enable composite stacks.

Calibration methods & documentation:

Interferometry and comparison techniques described, including corrections, auxiliary plates and calibration certificates.
Wringing test procedures and measurement uncertainty evaluation.

Informative annexes: examples of comparison devices, relation to the GPS matrix model and bibliography.

Applications and users

Calibration laboratories and national metrology institutes using gauge blocks as traceable length standards.

Manufacturers of gauge blocks and precision measuring instruments.

Quality/inspection departments in precision engineering and manufacturing requiring high-accuracy length references.

Calibration service providers issuing certificates for length standards.

Related standards

ISO 1 (reference temperature for length measurements)

ISO 1101 (geometrical tolerancing)

ISO 14253‑1 (inspection decision rules)

VIM (International Vocabulary of Metrology)

Keywords: EN ISO 3650:1998, ISO 3650, gauge blocks, length standards, gauge block calibration, interferometry, metrological traceability, reference temperature 20°C, GPS.

EN ISO 3650:1998 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

ISO 3650:1998

Geometrical Product Specifications (GPS) — Length standards — Gauge blocks

BS ISO 10791-4:1998

Test conditions for machining centres. Accuracy and repeatability of positioning of linear and rotary axes.

SIST EN ISO 1101:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, locatio…

SIST EN ISO 14253-1:2018

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment -…

SIST EN ISO 3650:2000/AC:2009

Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998/Cor 1:2008)