EN ISO 4507:2007 PDF

Overview

EN ISO 4507:2007 is the European adoption of the international standard ISO 4507:2000, developed by ISO/TC 119 for powder metallurgy. This standard specifies the methods for the determination and verification of case-hardening depth in sintered ferrous materials that have undergone carburizing or carbonitriding treatments. The measurement of the case-hardening depth is performed using a micro-hardness test, primarily based on the Vickers hardness testing method.

This standard is crucial for quality control in manufacturing processes involving sintered ferrous components that require a hardened surface layer to improve wear resistance and durability while maintaining a tough core. It provides procedures tailored for materials that retain porosity and applies specifically to quenched materials.

Key Topics

• Scope and Application The standard applies to carburized or carbonitrided sintered ferrous materials and defines micro-hardness test methods adapted for materials with porosity.

• Case-Hardening Depth (CHD) Defined as the distance from the surface at which the hardness reaches a specified limit value (commonly 550 HV 0.1), signifying the effective hardened zone.

• Testing Methods

  • Method A (Full Curve Analysis): Micro-hardness indentations are made at multiple depths normal to the surface. A hardness curve versus distance is plotted, and the case depth is read where hardness meets the specified limit.
  • Method A Modified: For porous structures where predetermined depths are impractical, individual hardness readings are plotted and evaluated similarly.
  • Method B (Spot Check): A simplified inspection method involving two sets of indentations at depths just above and below the estimated case depth, with an interpolated calculation or graphical determination.

• Apparatus and Procedure Utilizes Vickers or Knoop micro-hardness machines applying a load of 0.9807 N (HV 0.1). Samples must be properly prepared and polished to avoid errors due to surface roughness or porosity smearing.

• Precision and Accuracy Interlaboratory studies indicate high repeatability and reproducibility, with accepted deviations defined for repeated and cross-laboratory testing, ensuring reliable measurement outcomes.

• Reporting Requirements The test report should include full sample identification, heat treatment details, testing method, hardness values used, results, and any deviations or additional operations carried out.

Applications

• Automotive Industry Verification of surface hardening in sintered parts such as gears, cams, and other components requiring localized hardness for improved wear resistance.

• Powder Metallurgy Production Quality control testing of sintered ferrous materials subjected to case hardening processes to ensure consistency in mechanical performance.

• Engineering and Tooling Validation of carburizing and carbonitriding treatments which extend the life of sintered tools or mechanical parts through enhanced surface hardness.

• Material Research and Development Assessment of new sintered ferrous alloys and processing parameters to optimize case-hardening performance using standardized micro-hardness measurements.

Related Standards

• ISO 2639 - Steel - Determination and verification of effective depth of carburized and hardened cases: Provides complementary guidelines for steel materials beyond sintered ferrous.
• ISO 4498 - Sintered metal materials - Determination of apparent hardness and micro-hardness: Details procedures for micro-hardness testing applicable to sintered metals including test preparation and indentation measurement.
• MPIF Standard 52 - Determination of effectiveness of case depth for powder metallurgy products: A related test protocol providing additional validation and repeatability data.

Keywords: sintered ferrous materials, case-hardening depth, micro-hardness test, carburizing, carbonitriding, Vickers hardness, powder metallurgy, sintered metal testing, EN ISO 4507, surface hardening verification, metallurgical testing standards.