EN ISO 4608:2023 PDF

Name: EN ISO 4608:2023 — Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature (ISO 4608:2023)
SKU: EN ISO 4608:2023
Price: 60.09 EUR
Availability: InStock

Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature (ISO 4608:2023)

Название (английский):

EN ISO 4608:2023

Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature (ISO 4608:2023)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 14
Дата публикации:: 22 ноября 2023 г.
Издание:: CEN EN 4608 edition 2 version 1
ICS:: 83.080.20

Тип поставки:

Full version210 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:210 €

Описание (английский):

This document specifies a method for determining the plasticizer absorption at room temperature. It is applicable to PVC general-purpose resins and filler resins designated "G" and "F" in ISO 24024-1. This document can be used to determine the quantity of plasticizer absorbed by a resin at room temperature to give a dry mixture.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview - EN ISO 4608:2023 (Plastics - Determination of plasticizer absorption at room temperature)

EN ISO 4608:2023 specifies a laboratory method to determine the quantity of plasticizer absorbed by homopolymer and copolymer resins of vinyl chloride (PVC) at room temperature. Applicable to PVC general‑purpose resins and filler resins designated "G" and "F" in ISO 24024‑1, this test gives a practical indication of a resin’s suitability for producing plasticized dry blends.

Key topics and technical requirements

Scope and principle: An excess of plasticizer is added to a measured mass of resin; after a defined contact time the mixture is centrifuged and the amount of plasticizer retained by the resin is determined.

Apparatus and materials: specifies ordinary laboratory equipment plus precision balance (±0.1 mg), burette or dispenser (≈50 cm3), a horizontal‑rotor centrifuge (acceleration under test conditions 24 500 to 29 500 m·s‑2), and specific centrifuge tubes (conical bottom with 0.8 mm hole or tubes with sieve plate).

Sample sizes and conditions: typical test uses 2.000 g ±0.200 g resin and ~4 cm3 plasticizer (smaller tube option: 1 g resin and 2 cm3 plasticizer). Centrifuge temperature must be controlled so mixture temperature ≤30 °C after 60 min.

Absorbent blank and alternatives: cotton wool (pharmaceutical quality, ≈100 mg) or filter paper is used to trap excess plasticizer; alternatives (glass wool, PTFE‑coated polyester felt) are permitted if equivalent.

Plasticizers covered: Bis‑(2‑ethylhexyl) phthalate (DOP, CAS 117‑81‑7) and Bis‑(3,5,5‑trimethylhexyl) phthalate (DINP, CAS 28553‑12‑0 or 68515‑48‑0) with specified density, refractive index and viscosity ranges. Note: DOP is no longer used in Europe due to hazardous classification.

Procedure and reporting: clauses detail blank measurement, weighing, addition of plasticizer, centrifuging, calculation and expression of results, and required test report elements.

Practical applications and users

Product development and quality control: resin producers and compounders use EN ISO 4608:2023 to assess plasticizer uptake for formulation of dry blends and to predict processing behaviour.

Purchasing and specification: purchasers of PVC resins can specify this test to verify compatibility with intended plasticizers and blend recipes.

Regulatory and compliance testing: laboratories performing material characterization or conformity testing for PVC products.

R&D teams evaluating new plasticizers (e.g., DINP) or filler effects on absorption at room temperature.

Related standards

ISO 24024‑1 (designation of PVC resins)

ISO 1385‑1 (test methods for phthalate esters)

ISO 8655‑2 (pipettes / volumetric dispensers)

EN ISO 4608:2023 is the up‑to‑date method to quantify room‑temperature plasticizer absorption for vinyl chloride resins, supporting reliable formulation and quality assessment of plasticized PVC products.

EN ISO 4608:2023 PDF

Abstract

Похожие стандарты

Overview - EN ISO 4608:2023 (Plastics - Determination of plasticizer absorption at room temperature)

Key topics and technical requirements

Practical applications and users

Related standards

Технические детали

ISO 4608:2023

Plastics — Homopolymer and copolymer resins of vinyl chloride for general use — Determination of plasticizer…

BS EN ISO 24024-1:2021

Plastics. Homopolymer and copolymer resins of vinyl chloride. Designation system and basis for specifications.

SIST EN ISO 13851:2019

Safety of machinery - Two-hand control devices - Principles for design and selection (ISO 13851:2019)

SIST EN ISO 8655-2:2022

Piston-operated volumetric apparatus - Part 2: Pipettes (ISO 8655-2:2022)