EN ISO 7393-1:2000 PDF

Name: EN ISO 7393-1:2000 — Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N, N-diethyl-1,4-phenylenediamine (ISO 7393-1:1985)
SKU: EN ISO 7393-1:2000
Price: 51.9 EUR
Availability: InStock

Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N, N-diethyl-1,4-phenylenediamine (ISO 7393-1:1985)

Название (английский):

EN ISO 7393-1:2000

Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N, N-diethyl-1,4-phenylenediamine (ISO 7393-1:1985)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 10
Дата публикации:: 27 января 2000 г.
Издание:: CEN EN 7393 edition 1 version 1
ICS:: 13.060

Тип поставки:

Full version150 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:150 €

Описание (английский):

Specifies a procedure for water. Sea water and waters containing bromides and iodides comprise a group for which special procedures are required. The procedure is applicable to concentrations, in terms of chlorine, from 0,000 4 to 0,07 mmol/l total chlorine and at higher concentrations by dilution of samples. Several compounds influencing the procedure are noted.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview - EN ISO 7393-1:2000 (Water quality, DPD titrimetric method)

EN ISO 7393-1:2000 specifies a titrimetric procedure for the determination of free chlorine and total chlorine in water using N,N‑diethyl‑1,4‑phenylenediamine (DPD). The method covers routine laboratory analysis for many fresh waters at concentrations from about 0.0004 to 0.07 mmol/l (≈0.03–5 mg/l Cl2); higher concentrations can be measured after dilution. Sea water and waters containing significant bromide or iodide require special procedures. The document is the CEN-adopted version of ISO 7393-1:1985.

Key topics and technical requirements

Principle: DPD reacts with free chlorine to form a colored compound at pH ~6.2–6.5; titration with a standard ammonium iron(II) sulfate solution is used to reach a colourless end point. For total chlorine, potassium iodide is added prior to titration to liberate combined chlorine as iodine, which is then measured by the same titrimetric end point.

Reagents and solutions: DPD reagent, pH buffer (pH 6.5), potassium iodide (KI), ammonium iron(II) sulfate titrant and standardization against potassium dichromate are specified. Storage and shelf-life guidance (e.g., protecting reagents from light) are included.

Procedure: Two test portions per sample-one for free chlorine, one for total chlorine-with controlled addition order (buffer, DPD, sample; plus KI for total) and prompt titration.

Interferences and corrections: Notes on oxidized manganese, bromine/iodine, bromamines, ozone and chlorine dioxide; procedures to correct or account for interferences (including use of arsenite/thioacetamide to assess Mn interference) are described.

Accuracy & precision: Repeatability and reproducibility information and examples from interlaboratory evaluations are provided. Calculation formulas convert titrant volumes to chlorine concentration (mmol/l and conversion to mg/l).

Practical applications

Routine monitoring of drinking water, distribution systems, wastewater effluent, and process waters where chlorine residuals are controlled.

Compliance testing for regulatory programs and internal quality assurance in water treatment plants.

Field/portable lab verification after appropriate sample handling (avoid light, heat and delays).

Useful for operators assessing disinfection efficiency, residual decay and chlorination dosing.

Related standards

ISO 7393‑2 - DPD colorimetric method for routine control (complements Part 1)

ISO 7393‑3 - Iodometric titration method for total chlorine (alternative for higher concentrations)

Keywords: EN ISO 7393-1:2000, water quality, free chlorine, total chlorine, DPD titrimetric method, chlorine determination, titration, potassium iodide, ammonium iron(II) sulfate.

EN ISO 7393-1:2000 PDF

Abstract

Похожие стандарты

Overview - EN ISO 7393-1:2000 (Water quality, DPD titrimetric method)

Key topics and technical requirements

Practical applications

Who would use this standard

Related standards

Технические детали

ISO 7393-1:1985

Water quality — Determination of free chlorine and total chlorine — Part 1: Titrimetric method using N,N-diet…

SIST EN ISO 7393-2:2018

Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-dia…

SIST EN ISO 7393-3:2000

Water quality - Determination of free chlorine and total chlorine - Part 3: Iodometric titration method for t…