EN ISO 9455-3:2020 PDF

Name: EN ISO 9455-3:2020 — Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric and visual titration methods (ISO 9455-3:2019)
SKU: EN ISO 9455-3:2020
Price: 60.09 EUR
Availability: InStock

Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric and visual titration methods (ISO 9455-3:2019)

Название (английский):

EN ISO 9455-3:2020

Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric and visual titration methods (ISO 9455-3:2019)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 13
Дата публикации:: 13 мая 2020 г.
Издание:: CEN EN 9455 edition 2 version 1
ICS:: 25.160.50

Тип поставки:

Full version195 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:195 €

Описание (английский):

This document specifies two methods for the determination of the acid value of a flux of types 1 and 2 only, as defined in ISO 9454‑1. Method A is a potentiometric titration method and is to be considered as the reference method. Method B is an alternative, visual end‑point, titration method.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 9455-3:2020 - Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric and visual titration methods (ISO 9455-3:2019) is a CEN-adopted ISO standard describing two validated laboratory methods for measuring the acid value of soft soldering fluxes of types 1 and 2 (as defined in ISO 9454‑1). The document specifies a potentiometric titration (Method A) as the reference method and an alternative visual end‑point titration (Method B), including reagents, apparatus, procedures (manual and automated), calculation and reporting requirements.

Key topics and technical requirements

Scope: Applies only to flux types 1 and 2 (ISO 9454‑1).

Methods:

Method A - Potentiometric titration (reference): dissolve a weighed sample (≈0.5 g solid or 2.0 g liquid) in a suitable solvent (propan-2-ol, anhydrous ethanol, toluene or ethanol/toluene mix), titrate with 0.1 M tetrabutyl ammonium hydroxide, record pH or mV, plot titration curve and determine the end-point from the inflection (derivative) of the curve.
Method B - Visual titration: alternative titration using a visual indicator to identify the end-point.

Reagents: analytical grade solvents and a standardized tetrabutyl ammonium hydroxide solution (0.1 mol/l) are specified; solvents should be neutralized as indicated.

Apparatus: pH/millivolt meter, glass electrode, saturated calomel or Ag/AgCl reference electrode, stirrer, burette, and optionally an automated titration system with processor unit.

Procedure controls: carry out determinations in triplicate, use blank determinations, select solvent based on solubility, and document automated system settings per manufacturer manual.

Reporting: calculation method and required test report content are defined; precision information is included in the standard.

Applications and users

This standard is practical for:

Flux manufacturers performing quality control of soft soldering flux acidity.

Independent testing laboratories and QC departments verifying conformity of flux batches.

Electronics assemblers, soldering engineers and procurement teams needing objective acid value data for process control and material selection.

Standards committees and compliance officers referencing harmonized European/ISO methods.

Practical benefits include standardized, reproducible acid-value measurement for process optimization, material comparison, and traceable QC records.

Related standards

ISO 9454‑1 - Classification of soft soldering fluxes (flux types 1 and 2).

ISO 9455‑1 / ISO 9455‑2 - Related test procedures referenced for non-volatile matter and sample handling.

EN ISO 9455 series - other parts covering additional flux test methods.

Keywords: EN ISO 9455-3:2020, acid value, soft soldering fluxes, potentiometric titration, visual titration, tetrabutyl ammonium hydroxide, flux testing, ISO 9454-1, soldering flux QC.

EN ISO 9455-3:2020 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

ISO 9455-3:2019

Soft soldering fluxes — Test methods — Part 3: Determination of acid value, potentiometric and visual titrati…

SIST EN ISO 9454-1:2016

Soft soldering fluxes - Classification and requirements - Part 1: Classification, labelling and packaging (IS…

SIST EN ISO 9455-17:2024

Soft soldering fluxes - Test methods - Part 17: Surface insulation resistance comb test and electrochemical m…

SIST EN ISO 9455-2:2001

Soft soldering fluxes - Test methods - Part 2: Determination of non-volatile matter, ebulliometric method (IS…