EN ISO 9974-3:2000 PDF

Name: EN ISO 9974-3:2000 — Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996)
SKU: EN ISO 9974-3:2000
Price: 51.9 EUR
Availability: InStock

Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996)

Название (английский):

EN ISO 9974-3:2000

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 10
Дата публикации:: 24 мая 2000 г.
Издание:: CEN EN 9974 edition 1 version 1
ICS:: 23.100.60

Тип поставки:

Full version150 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:150 €

Описание (английский):

Specifies dimensions, performance requirements and test procedures for heavy-duty (S series), light-duty (L series) and extra-light-duty (LL series) stud ends with ISO 261 threads and metal-to-metal sealing. It also specifies the designation of these stud ends.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 9974-3:2000 (ISO 9974-3:1996) defines dimensions, performance requirements and test procedures for stud ends with metal-to-metal sealing (type B) and ISO 261 threads. The standard covers extra-light (LL), light (L) and heavy-duty (S) series used for ports and stud ends in general use and fluid-power applications. It includes designation rules, material guidance and qualification tests required to demonstrate conformity.

Key points in the scope:

Applies to stud ends with ISO 261 threads and metal-to-metal sealing (type B).

Specifies dimensions, performance requirements and test procedures for LL, L and S series.

Notes that these stud ends may be used up to specified working pressures but are not recommended for leak-free hydraulic designs if re-used.

Key Topics

Dimensions and designation: Stud ends conform to the dimensional tables and figures in the standard and are designated with the format referencing the part (e.g. "Stud end ISO 9974-3 - M10 x 1,5 S").

Materials: Stud ends are typically manufactured from low-carbon steel and plated. Test blocks are unplated and hardened to 45–50 HRC for qualification tests.

Working pressures: Published guidance indicates maximum working pressures of approximately 10 MPa for LL series, 25 MPa for L series and 40 MPa for S series (actual permissible pressure depends on size, material and application).

Sealing behaviour: Metal-to-metal sealing produces a machined sealing edge that is compressed at assembly and damages the port sealing face, making safe re-assembly and guaranteed leak-free reuse impractical.

Qualification tests: The standard specifies burst and cyclic impulse tests (burst/working ratio, burst pressure tests, and a cyclic endurance impulse test requiring 1,000,000 cycles for qualification).

Test torques: Qualification torques are defined in the standard (table 3) for sizes from M12 to M48; example test torques include M12×1.5 = 45 N·m and M48×2 = 800 N·m (values are for testing only).

Applications

EN ISO 9974-3:2000 is intended for designers, manufacturers and testing laboratories working on:

Fluid-power connectors and fittings for pneumatic and hydraulic circuits (general use).

Tube, pipe and hose fittings that use stud ends with metal-to-metal sealing.

Product qualification, procurement specifications and conformity assessment for stud-end components.

Practical benefits include standardized interchangeability, defined performance criteria (burst and impulse), and clear designation and test-reporting requirements (Annex A provides a test data form).

Related Standards

EN ISO 9974-1 (Threaded ports)

EN ISO 9974-2 (Stud ends with elastomeric sealing)

ISO 261 (General-purpose metric screw threads)

ISO 8434 series (tube connections)

Annex A of EN ISO 9974-3 is normative (test data form); Annex B is informative (bibliography). Use the standard to ensure compatible, tested stud ends for fluid-power and general-purpose connections.

EN ISO 9974-3:2000 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

ISO 9974-3:1996

Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or me…

BS EN ISO 2614:2023

Analysis of natural gas. Biomethane. Determination of terpenes´ content by micro gas chromatography.

SIST EN ISO 9974-3:2001

Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or me…

SIST EN ISO 9974-1:2001

Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or me…

SIST EN ISO 9974-2:2001

Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or me…

ISO 12151-1:2010/Amd 1:2017

Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3…