IEC 60189-3:2007 PDF

Name: IEC 60189-3:2007 — Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples
SKU: IEC 60189-3:2007
Price: 35 EUR
Availability: InStock

Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples

Название (английский):

IEC 60189-3:2007

Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 13
Дата публикации:: 23 мая 2007 г.
Издание:: IEC IS 60189 edition 4 version 1
ICS:: 29.060.10

Тип поставки:

Full version195 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:195 €

Описание (английский):

is applicable to equipment wires with solid or stranded conductor, polyvinyl chloride (PVC) insulated, in singles, pairs and triples to be used for internal wiring of telecommunication equipment, industrial and consumer electronic equipment.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты IEC

Overview

IEC 60189-3:2007 - part of the IEC 60189 series - is the international standard for PVC-insulated equipment wires (singles, pairs and triples) used for internal wiring of telecommunication, industrial and consumer electronic equipment. This fourth edition (2007) defines construction, material, mechanical, thermal and electrical requirements for low-frequency wires with PVC insulation and PVC sheath.

Key topics and technical requirements

Scope: Applies to solid or stranded conductors, PVC insulated, in single, paired or triple configurations for internal equipment wiring.

Conductor material & type:

Annealed copper in accordance with IEC 60028; very small gauges (0.12 mm, 0.15 mm diameters and 0.035 mm2 area) may be copper alloy.
Solid (single strand) or stranded (concentric or bunching) conductors permitted.
Conductor finish: plain or tinned.
Joints allowed only when necessary; joint breaking strength must be ≥ 85% of unjointed conductor. Joints in complete stranded conductors are not permitted.

Insulation:

Material: PVC (polyvinyl chloride or vinyl‑chloride/vinyl‑acetate copolymers).
Thickness: minimum values defined in Annex A; maximum insulated wire diameter calculated per Annex C.
Insulation must fit closely without adhering to conductor; stripping must be possible without damage.

Colour and identification:

Colours follow IEC 60304 standard colours; two-colour marking (rings/helices) rules and minimum marking dimensions specified.
Note: YELLOW‑GREEN reserved for protective earth.

Assembly:

Configurations: single, pair or triple; maximum lay length for twisted pairs/triples ≤ 120 mm.

Tests and performance:

Mechanical: conductor elongation, insulation physical integrity.
Thermal and climatic: insulation shrinkage after overheating, cold bend, heat shock.
Fire/climate: resistance to flame propagation.
Electrical: conductor resistance (IEC 60028), dielectric strength, insulation resistance.

Delivery: on reels or coils with suitable protection.

Applications and who uses this standard

Cable and wire manufacturers for product design and quality control.

OEMs and equipment designers (telecommunications, consumer electronics, industrial controls) specifying internal wiring.

Procurement and compliance teams writing technical specifications and acceptance tests.

Test laboratories and certification bodies conducting mechanical, thermal and electrical verification.

Related standards

IEC 60189-1 (general test and measuring methods)

IEC 60028 (copper resistance standards)

IEC 60304 (standard colours for insulation)

IEC 60344, IEC 60649, ISO 105 (referenced for calculation methods and colour fastness)

Keywords: IEC 60189-3, PVC insulated wires, equipment wires, low-frequency cables, internal wiring, conductor specifications, wire colour codes, electrical testing.

IEC 60189-3:2007 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses this standard

Related standards

Технические детали

IEC 60189-1:2018

Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods

BS EN ISO 10565:1998

Oilseeds. Simultaneous determination of oil and water contents. Methods using pulsed nuclear magnetic resonan…

IEC 60050-161:1990/AMD2:1998

Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 161: Electromagnetic compatibility

IEC 60335-2-24:2020/COR1:2021

Corrigendum 1 - Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for…

IEC 61753-084-2:2007/COR1:2008

Corrigendum 1 - Fibre optic interconnecting devices and passive components performance standard - Part 084-2:…

IEC 62716:2013/COR1:2014

Corrigendum 1 - Photovoltaic (PV) modules - Ammonia corrosion testing

IEC 62946-02:2017/COR1:2020

Corrigendum 1 - Connectors for electronic equipment - Part 02: Detail specification for 8-way, unshielded, fr…

IEC 61753-1:2018/COR1:2019

Corrigendum 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: G…