IEC 60512-2-1:2002 PDF

Name: IEC 60512-2-1:2002 — Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method
SKU: IEC 60512-2-1:2002
Price: 23.25 EUR
Availability: InStock

Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method

Название (английский):

IEC 60512-2-1:2002

Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 9
Дата публикации:: 22 февраля 2002 г.
Издание:: IEC IS 60512 edition 1 version 1
ICS:: 31.220.10

Тип поставки:

Full version135 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:135 €

Описание (английский):

Defines a standard test method to measure the electrical resistance across a pair of mated contacts or a contact with a measuring gauge. Measurements may be carried out with direct current or alternating current.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты IEC

Overview

IEC 60512-2-1:2002 is an international standard developed by the International Electrotechnical Commission (IEC) that specifies a standardized test method for measuring the electrical resistance of connectors used in electronic equipment. This part of IEC 60512 focuses on Test 2a: Contact resistance using the millivolt level method to assess the electrical continuity and contact resistance of mated contacts or a contact with a measuring gauge. The standard covers measurements using either direct current (DC) or alternating current (AC) at frequencies not exceeding 2 kHz. Precise contact resistance testing ensures reliable connector performance essential in electronic systems.

Key Topics

Scope and Purpose The standard defines a method to accurately determine the contact resistance of electromechanical components within the IEC technical committee 48 domain. It is applicable where detailed specifications require this specific test and can be adapted for similar electronic devices.

Measurement Requirements

Measurements may use DC or AC current (up to 2 kHz).
Test voltage must not exceed 20 mV to avoid damaging insulating films on contacts.
Test current should not exceed 100 mA.
The measuring apparatus must maintain accuracy within a 1% total error margin.

Test Procedure

Voltage drop is measured across connection points specified in the detail specification.
The contacts must not be operated during measurement to ensure accuracy.
Abnormal pressure on contacts must be avoided, and test cables should be stable.
If direct access to connection points is unavailable, the resistance of connecting wires must be subtracted from the measurement.
D.C. testing involves measuring resistance in both forward and reverse current directions, then averaging results, ensuring balanced and reliable readings using a specified formula: [ R = \frac{V_{mf} - V_{mr}}{I_f + I_r} ] where (V) and (I) represent measured voltages and currents in both directions.

Measurement Cycles

With DC: apply voltage, measure forward current, measure reverse current, then disconnect.
With AC: apply voltage, take measurement, then disconnect.

Standards Compliance and Reporting

Resistance values must conform to limits in the specific product specification.
Any deviations from the test procedure must be documented in test reports for traceability.

Applications

IEC 60512-2-1:2002 is essential for manufacturers, quality engineers, and testers involved in:

Connector Manufacturing Ensuring the quality of electrical contacts by quantifying contact resistance to meet global standards.

Electronic Equipment Production Validating connectors and components for reliable signal and power transmission in devices such as computers, telecommunications gear, industrial electronics, and consumer products.

Quality Assurance and Inspection Employing this standardized test method in assembly lines and final inspection to verify consistency and compliance with international electrical specifications.

Research and Development Developing new connector designs and materials by evaluating contact resistance performance and reliability under controlled conditions.

Related Standards

IEC 60512 Series: Comprehensive series covering various tests and measurements for connectors used in electronic equipment, including mechanical, climatic, and endurance tests.

IEC 60034-1: Standard for rotating electrical machines, referenced in IEC publications numbering system.

ISO/IEC Directives Part 3: Governs the preparation and drafting of IEC standards ensuring consistency and transparency.

This standard plays a critical role in guaranteeing that connectors provide minimal resistance interference, ensuring safe and efficient electrical connectivity in modern electronic systems around the world. Adhering to IEC 60512-2-1 improves interoperability, safety, and product quality for industries relying on precision electrical contacts.

IEC 60512-2-1:2002 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

IEC 60512-23-3:2000/COR1:2003

Corrigendum 1 - Electromechanical components for electronic equipment - Basic testing procedures and measurin…

IEC 60034-18-41:2014/AMD1:2019

Amendment 1 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems…

IEC 60050-161:1990/AMD2:1998

Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 161: Electromagnetic compatibility

IEC 60335-2-24:2020/COR1:2021

Corrigendum 1 - Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for…

IEC 61753-084-2:2007/COR1:2008

Corrigendum 1 - Fibre optic interconnecting devices and passive components performance standard - Part 084-2:…

IEC 62716:2013/COR1:2014

Corrigendum 1 - Photovoltaic (PV) modules - Ammonia corrosion testing

IEC 62946-02:2017/COR1:2020

Corrigendum 1 - Connectors for electronic equipment - Part 02: Detail specification for 8-way, unshielded, fr…

IEC 61753-1:2018/COR1:2019

Corrigendum 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: G…