IEC 60580:2000 PDF

Name: IEC 60580:2000 — Medical electrical equipment - Dose area product meters
SKU: IEC 60580:2000
Price: 35 EUR
Availability: InStock

Medical electrical equipment - Dose area product meters

Название (английский):

IEC 60580:2000

Medical electrical equipment - Dose area product meters

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 32
Дата публикации:: 14 января 2000 г.
Издание:: IEC IS 60580 edition 2 version 1
ICS:: 11.040.50

Тип поставки:

Full version480 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:6 раб. дн. (перевод)

Цена:480 €

Описание (английский):

Specifies the performance and testing of dose area product meters with ionization chambers intended to measure dose area product and/or dose area product rate to which the patient is exposed during medical radiological examinations. The object of this International Standard is 1) to establish requirements for a satisfactory level of performance for dose area product meters, and 2) to standardize the methods for the determination of compliance with this level of performance.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты IEC

Overview

IEC 60580:2000 - Medical electrical equipment - Dose area product meters - specifies performance requirements and standardized test methods for dose area product (DAP) meters that use ionization chambers to measure DAP and DAP rate during medical radiological examinations. The standard establishes a satisfactory level of performance and prescribes how to determine compliance under defined standard test conditions. IEC 60580 (2nd edition, 2000) supports consistent, traceable measurements used for patient dose monitoring and radiation protection in diagnostic radiology.

Key topics and technical requirements

Scope and objective: Defines requirements for DAP meters and standardized compliance testing to ensure reliable patient exposure measurements.

Performance characteristics: Includes limits and tests for relative intrinsic error, repeatability, resolution, stabilization time, response time, drift and long‑term stability.

Measurement geometry: Specifies the plane of measurement, minimum effective ranges, and field-size considerations for valid DAP readings.

Ionization chamber behavior: Addresses chamber construction, recombination losses, air density effects, and stabilization procedures.

Influence quantities: Defines acceptable limits for effects of energy dependence, DAP rate dependence, irradiation time, operating voltage, air pressure, temperature/humidity, and electromagnetic compatibility (EMC).

Uncertainty and statistics: Requires assessment of combined standard uncertainty, statistical fluctuation limits, and guidance on number of readings for confidence levels.

Construction and marking: Specifies display, failure indication (e.g., polarizing voltage), over‑range handling, reset indication, and required labeling and accompanying documentation.

Testing and documentation: Standardizes test conditions, procedures, and the format of performance documentation.

Applications and who uses IEC 60580

Manufacturers of DAP meters and ionization chamber assemblies - to design, test and certify products that meet international performance criteria.

Medical physicists and clinical engineers - for acceptance testing, routine quality assurance (QA), device calibration checks and verifying measurement uncertainty in radiology departments.

Accredited test laboratories and conformity assessment bodies - to perform standardized compliance testing and issue reports.

Hospital procurement and regulatory agencies - to specify performance requirements for equipment purchases and maintain dose audit programs.

Training and optimization - supports dose optimization, technique comparison, and staff training by ensuring reliable, comparable DAP readings.

Related standards

IEC 60601‑1 (medical electrical equipment - safety)

IEC 60601‑1‑2 (EMC)

IEC 60731 (dosimeters with ionization chambers)

ICRU Report 60 (quantities & units)

ISO Guide to the expression of uncertainty in measurement (GUM)

Keywords: IEC 60580, dose area product meter, DAP meter, ionization chamber, medical radiology, patient dose, performance testing, uncertainty, EMC, quality assurance.

IEC 60580:2000 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses IEC 60580

Related standards

Технические детали

BS EN IEC 60580:2020

Medical electrical equipment. Dose area product meters

IEC 60601-1:2005

Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

IEC 60050-161:1990/AMD2:1998

Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 161: Electromagnetic compatibility

IEC 60335-2-24:2020/COR1:2021

Corrigendum 1 - Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for…

IEC 61753-084-2:2007/COR1:2008

Corrigendum 1 - Fibre optic interconnecting devices and passive components performance standard - Part 084-2:…

IEC 62716:2013/COR1:2014

Corrigendum 1 - Photovoltaic (PV) modules - Ammonia corrosion testing

IEC 62946-02:2017/COR1:2020

Corrigendum 1 - Connectors for electronic equipment - Part 02: Detail specification for 8-way, unshielded, fr…

IEC 61753-1:2018/COR1:2019

Corrigendum 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: G…