IEC 60747-5-15:2022 PDF

Name: IEC 60747-5-15:2022 — Semiconductor devices - Part 5-15: Optoelectronic devices - Light emitting diodes - Test method of the flat-band voltage based on the electroreflectance spectroscopy
SKU: IEC 60747-5-15:2022
Price: 35 EUR
Availability: InStock

Semiconductor devices - Part 5-15: Optoelectronic devices - Light emitting diodes - Test method of the flat-band voltage based on the electroreflectance spectroscopy

Название (английский):

IEC 60747-5-15:2022

Semiconductor devices - Part 5-15: Optoelectronic devices - Light emitting diodes - Test method of the flat-band voltage based on the electroreflectance spectroscopy

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 14
Дата публикации:: 7 января 2022 г.
Издание:: IEC IS 60747 edition 1 version 1
ICS:: 31.080.99

Тип поставки:

Full version210 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:210 €

Описание (английский):

IEC 60747-5-15:2022(E) specifies the measuring methods of flat-band voltage of single GaN‑based light emitting diode (LED) die or package without phosphor, based on the electroreflectance (ER) spectroscopy. White LEDs for lighting applications are out of the scope of this part of IEC 60747-5.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты IEC

Overview

IEC 60747-5-15:2022 defines a standardized test method to measure the flat‑band voltage (VFB) of single GaN‑based light emitting diode (LED) die or packages (without phosphor) using electroreflectance (ER) spectroscopy. The standard explains the ER measurement setup, environmental and instrument conditions, the measurement sequence to locate the flat‑band voltage, and how VFB can be used to determine the internal electric field in the LED active region. White LEDs for lighting applications are explicitly out of scope.

Key topics and requirements

Scope & purpose

Measurement of flat‑band voltage of single GaN‑based LEDs (die or package without phosphor).
VFB is used to derive the internal electric field across quantum wells.

Measurement principle

ER spectroscopy monitors the modulated reflectance signal (ΔR/R) produced by applying a small modulation voltage ΔV on top of a DC bias V.
The flat‑band voltage is identified where the ER response to the modulation is minimal and a phase inversion of the ER signal occurs as DC bias crosses VFB.

Test setup

Function generator for DC + modulation voltage (V + ΔV), monochromator for wavelength selection, photomultiplier tube (PMT) for reflected light detection, and a lock‑in amplifier.
Spectrally resolved ΔR/R is recorded and the ER peak amplitude is plotted versus bias to find the intercept (VFB).

Environmental and instrument conditions

Ambient temperature default: 25 ± 3 °C (natural convection).
Relative humidity: 25 % RH to 75 % RH.
Thermal equilibrium requirement when heat affects measurements.
Instruments referenced are aligned with IEC 60747‑5‑6:2021 measuring equipment requirements.

Output

Test report elements and optional calculation of internal electric field using VFB together with known microstructural parameters (layer widths, built‑in voltage).

Applications and who uses it

Device characterization and R&D: LED researchers and device engineers use the method to quantify internal electric fields and polarization effects in InGaN/GaN quantum wells.

Quality control & process monitoring: Manufacturers apply the standard for pass/fail criteria and process drift detection on LED wafers or packaged dies (without phosphor).

Failure analysis & supplier validation: Test labs and integrators rely on ER‑based VFB measurements to verify device consistency and to investigate electrical/optical anomalies.

Related standards

IEC 60747‑5‑6:2021 (Optoelectronic devices - Light emitting diodes) - referenced for measuring instruments and equipment.

Other parts of the IEC 60747 series cover broader semiconductor device and optoelectronic testing practices.

Keywords: IEC 60747-5-15:2022, flat-band voltage, electroreflectance spectroscopy, ER spectroscopy, GaN-based LED, internal electric field, test method, LED characterization.

IEC 60747-5-15:2022 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and who uses it

Related standards

Технические детали

IEC 60747-5-6:2021

Semiconductor devices - Part 5-6: Optoelectronic devices - Light emitting diodes

BS IEC 60747-12-3:1998

Discrete semiconductor devices and integrated circuits - Optoelectronic devices. Blank detail specification f…

IEC 60050-161:1990/AMD2:1998

Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 161: Electromagnetic compatibility

IEC 60335-2-24:2020/COR1:2021

Corrigendum 1 - Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for…

IEC 61753-084-2:2007/COR1:2008

Corrigendum 1 - Fibre optic interconnecting devices and passive components performance standard - Part 084-2:…

IEC 62716:2013/COR1:2014

Corrigendum 1 - Photovoltaic (PV) modules - Ammonia corrosion testing

IEC 62946-02:2017/COR1:2020

Corrigendum 1 - Connectors for electronic equipment - Part 02: Detail specification for 8-way, unshielded, fr…

IEC 61753-1:2018/COR1:2019

Corrigendum 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: G…