IEC 61076-7:2000 PDF

Name: IEC 61076-7:2000 — Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specifiation
SKU: IEC 61076-7:2000
Price: 35 EUR
Availability: InStock

Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specifiation

Название (английский):

IEC 61076-7:2000

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 37
Дата публикации:: 16 июня 2000 г.
Издание:: IEC IS 61076 edition 1 version 1
ICS:: 31.220.10

Тип поставки:

Full version555 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:7 раб. дн. (перевод)

Цена:555 €

Описание (английский):

Establishes uniform specifications, type test requirements and quality assessment procedures for cable outlet accessories as well as rules for the preparation of detail specifications for cable outlet accessories of assessed quality for connectors for frequencies below 3 MHz.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

IEC 61076-7:2000 specifies uniform requirements for cable outlet accessories (rear accessories, backshells) for connectors used in d.c., low‑frequency analogue and digital high‑speed data applications for frequencies below 3 MHz. The standard defines type test requirements, quality assessment procedures and rules for preparing detailed specifications for accessories of assessed quality, including qualification approval and capability approval under the IECQ system.

Key topics and technical requirements

Scope and applicability: Applies to cable outlet accessories for connectors operating below 3 MHz; detailed specifications take precedence where conflicts occur.

Quality assessment: Procedures for manufacturer approval, qualification testing, capability approval and maintenance of capability are defined, including test schedules and required records.

Type testing and grouping: Defines grouping of tests, preconditioning, specimen preparation and general test schedules consistent with IEC testing practice.

Climatic classification: Accessories are classified into climatic categories (temperature ranges and damp‑heat severities) following IEC 60068 rules to guide environmental performance expectations.

Materials and finishes: Materials must comply with the detail specification; preferred finishes (e.g., anodize, electroless nickel, cadmium plating) and corrosion considerations are specified.

Styles and identification: Defines accessory styles (sealed/unsealed, shielded/unshielded, conduit adapters, shrinkboot types) and the IEC type designation and marking rules for traceability.

Packaging and storage: Packaging (transparent inert bags) and storage inspection intervals (every five years) are prescribed.

Normative references: Cross‑references established IEC and ISO documents for terminology, environmental testing and test methods (e.g., IEC 60068, IEC 60512).

Practical applications and users

Who uses it: Connector and accessory manufacturers, OEMs, procurement and quality managers, test laboratories and conformity assessment bodies (IECQ).

Why it matters: Ensures consistent performance, interchangeability and verified manufacturing capability for cable outlet accessories used in low‑frequency data and power applications. It supports supplier qualification, procurement specifications and product acceptance testing.

Typical use cases: Specifying assessed‑quality backshells and cable outlets for industrial automation, instrumentation and any equipment using low‑frequency analogue/digital signals where documented qualification and manufacturing capability are required.

Related standards

Relevant normative documents cited in IEC 61076-7:2000 include:

IEC 60068 (environmental testing)

IEC 60512 (test procedures for electromechanical components)

IEC 60050(581) (terminology)

IEC 61076-7-001 (blank detail specification)

ISO 129, ISO 1101, CECC 00109 and IECQ QC rules for quality assessment

Keywords: IEC 61076-7, cable outlet accessories, backshell, connectors, assessed quality, qualification approval, capability approval, low-frequency connectors, IECQ, environmental testing.

IEC 61076-7:2000 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Practical applications and users

Related standards

Технические детали

IEC 60068-2-82:2007/COR1:2009

Corrigendum 1 - Environmental testing - Part 2-82: Tests - Test XW1: Whisker test methods for electronic and…

IEC 60512-23-3:2000/COR1:2003

Corrigendum 1 - Electromechanical components for electronic equipment - Basic testing procedures and measurin…

IEC 60050-161:1990/AMD2:1998

Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 161: Electromagnetic compatibility

IEC 61076-7-001:2004

Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification

BS ISO 12991:2012

Liquefied natural gas (LNG). Tanks for on-board storage as a fuel for automotive vehicles.

SIST EN ISO 1101:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, locatio…