Overview
IEC 61169-16:2006 is the IEC sectional specification for RF coaxial connectors (type N) with an outer-conductor inner diameter of 7 mm (0.276 in) and a screw coupling. It defines rules and guidance for preparing Detail Specifications (DS) for pin and socket connectors used in low-to-medium power RF applications. The document covers the 50 Ω family (with a deprecated 75 Ω variant provided for guidance) and specifies interface dimensions, grades, performance expectations and test/inspection requirements.
Key topics and technical requirements
- Connector types and designation
- Type N, 50 Ω (75 Ω guidance) - example designation: 61169-16 IEC-50-G0 (standard test connector).
- Three grades: Grade 0 (standard test), Grade 1 (high performance), Grade 2 (general purpose); all three 50 Ω versions are mateable.
- Interface dimensions
- Inch-based primary dimensions; metric equivalents provided as acceptable alternatives.
- Key mechanical details include centre contact forms (pin and socket), mating threads (e.g. 5/8‑24 UNEF‑2B referenced), gauge limits and tolerances.
- Electrical / frequency guidance
- Grade 2 (general purpose) suitable with IEC 60096-2 cable up to ~12 GHz.
- Grade 1 (high performance) and Grade 0 (standard test) intended for lower reflection and precision use - some Grade 1/0 devices may be used up to 18 GHz.
- Quality assessment and testing
- Ratings and characteristics, test schedules, inspection criteria and periodic/acceptance tests are defined to support DS preparation.
- Mechanical gauges, standard test connectors and detailed test connector drawings are provided as references.
- 75 Ω note
- 75 Ω Type N is strongly deprecated; accidental mating with 50 Ω can cause damage - clear identification recommended.
Applications and users
- Who uses this standard:
- Connector manufacturers preparing detail specifications and production drawings.
- RF / microwave test laboratories and calibration facilities using Grade 0 standard test connectors.
- OEMs and system integrators specifying reliable RF interfaces for equipment, cable assemblies and components.
- Procurement, quality and compliance engineers ensuring interchangeability and testability.
- Typical applications:
- RF test benches, coaxial cable assemblies, microwave components and equipment where Type N interfaces are required for up to 12–18 GHz depending on grade.
Related standards
Keywords: IEC 61169-16:2006, type N connector, RF coaxial connector, 50 ohm, 75 ohm, screw coupling, sectional specification, detail specification, grade 0, grade 1, grade 2, interface dimensions, test connector.