Overview
IEC 61196-6:2021 is the international sectional specification for CATV drop cables within the IEC 61196 series on coaxial communication cables. It defines construction, identification, electrical and environmental requirements for coaxial drop cables used for analogue and digital one- and two‑way signal transmission. The standard covers operating frequencies from 5 MHz to 1 000 MHz or 5 MHz to 3 000 MHz and an operating temperature range of −40 °C to +70 °C. Edition 2.0 (2021) replaces the 2009 edition and includes an extended scope and revised sheath marking and labelling.
Key topics
- Scope and application: CATV, MATV and SMATV drop cables; transmission of TV, sound, interactive services, surveillance/control systems and satellite receiving systems; BCT signals.
- Materials and cable construction: inner conductor (single wire or tube), dielectric, outer conductor/screen, sheath and completed cable assembly.
- Identification and marking: type names, variants, screening classes, and revised requirements for sheath marking and labelling for traceability and compliance.
- Electrical requirements and tests:
- Low-frequency and DC measurements (e.g., d.c. resistance, insulation resistance)
- High-frequency and transmission measurements (e.g., characteristic impedance, return loss, attenuation)
- Environmental and mechanical tests: damp heat, cold bend, water penetration, thermal cycling, UV stability, tensile/pull, crush and abrasion tests.
- Fire performance and safety: specified fire test methods and relevant fire performance classifications.
- Quality assessment, delivery and storage: procedures for conformity verification and handling.
Applications
IEC 61196-6:2021 is intended for components used in:
- Cable TV (CATV) and two‑way cable networks
- Satellite TV receiving systems and MATV/SMATV installations
- Interactive services, IPTV distribution, surveillance & control signal feeds
- Short in-building and last‑mile cable drop links where defined impedance, attenuation and screening are essential
Who should use this standard
- Cable manufacturers designing and producing CATV drop cables
- System integrators and network operators specifying cable performance and procurement
- Test laboratories performing electrical, environmental and mechanical testing
- Installers and consultants ensuring compliance with required cable marking, screening and fire performance
- Regulatory bodies and spec writers referencing standardized drop-cable requirements
Related standards
IEC 61196-6 references and aligns with other standards such as IEC 61196-1 (generic coaxial requirements), IEC 60728 series (cable networks for television), and ISO/IEC 11801 parts for structured cabling.
Keywords: IEC 61196-6:2021, CATV drop cables, coaxial communication cables, cable testing, sheath marking, return loss, attenuation, screening classes.