IEC 62037-3:2012 PDF

Name: IEC 62037-3:2012 — Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of passive intermodulation in coaxial connectors
SKU: IEC 62037-3:2012
Price: 23.25 EUR
Availability: InStock

Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of passive intermodulation in coaxial connectors

Название (английский):

IEC 62037-3:2012

Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of passive intermodulation in coaxial connectors

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 24 июля 2012 г.
Издание:: IEC IS 62037 edition 1 version 1
ICS:: 33.040.20

Тип поставки:

Full version120 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

IEC 62037-3:2012 is part of the IEC 62037 series, and defines the impact test on coaxial connectors to evaluate their robustness against weak connections and particles inside the connector as independently as possible from the effects of cable PIM (passive intermodulation).

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

IEC 62037-3:2012 is an international standard developed by the International Electrotechnical Commission (IEC) that focuses on the measurement of passive intermodulation (PIM) in coaxial connectors used in RF and microwave devices. As part of the IEC 62037 series, this part specifically defines an impact test protocol to assess the robustness of coaxial connectors against weak connections and contaminants such as particles inside the connector. The standard seeks to isolate the effects of the connector itself from those of cable PIM to provide consistent and reliable intermodulation level evaluation.

This document is critical for manufacturers, testers, and quality assurance professionals in the telecommunications and high-frequency component industries, enabling them to evaluate connector performance under mechanical stress conditions typical in real-world applications.

Key Topics

Scope of Testing IEC 62037-3 evaluates impact resistance and mechanical robustness of coaxial connectors by applying a series of controlled impacts while monitoring passive intermodulation levels. This allows detection of weak contacts and internal contaminants without interference from cable-induced PIM.

Test Setups Two test configurations are supported:

Setup 1 - Multi-port device under test (DUT) using a short connector assembly to minimize transmission line effects.
Setup 2 - Single connector mounted on a length of transmission line with adequate attenuation to isolate connector PIM contributions.

Impact Test Methods A drop-weight impact test uses a brass rod dropped from a specified height onto various positions of the connector to simulate mechanical stress. The parameters such as drop mass and height vary based on connector type (e.g., 7-16, N, TNC, SMA).

Measurement Procedures Intermodulation products are measured before, during, and after impacts to determine any degradation in connector performance. Frequency sweep methods identify the frequencies where maximum PIM occurs to target impact testing effectively.

Reporting Requirements Test reports must document impact conditions, including mass, drop height, drop distance, and detailed PIM measurements throughout the test cycle, ensuring traceability and standardized data comparison.

Applications

Telecommunication Infrastructure Ensuring the durability and reliability of coaxial connectors used in cellular base stations, antenna systems, and microwave links.

RF and Microwave Component Manufacturing Quality control testing to verify connectors meet robust mechanical standards minimizing passive intermodulation products that could affect system performance.

System Integration and Maintenance Evaluation of connectors during installation and maintenance to prevent performance degradation caused by mechanical stresses or contamination.

Laboratory and Compliance Testing Providing standardized testing methods for certification bodies and research facilities assessing the PIM performance of RF/microwave connectors.

Related Standards

IEC 62037-1: Passive RF and microwave devices, intermodulation level measurement – General requirements and measuring methods. This foundational document outlines broad guidelines for PIM assessment applicable to various device types.

IEC 62037-4: Measurement of passive intermodulation in coaxial cables. Complements Part 3 by focusing on cable-induced PIM and ensuring cables used in testing meet specific performance criteria.

Additional IEC Standards: Related documents addressing PIM in other components or transmission media provide holistic coverage for RF and microwave passive device testing.

Summary

IEC 62037-3:2012 provides a standardized, reliable methodology to measure and evaluate passive intermodulation in coaxial connectors under mechanical impact, addressing a critical aspect of RF system performance. By applying rigorous impact tests and precise PIM measurement protocols, the standard enables improved connector design, manufacturing quality, and system reliability across telecommunications and electronic industries. Understanding and implementing IEC 62037-3 is essential for professionals seeking to minimize PIM-related issues and enhance the durability of coaxial connection hardware.

IEC 62037-3:2012 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Summary

Технические детали

BS EN IEC 62037-8:2022

Passive RF and microwave devices, intermodulation level measurement - Measurement of passive intermodulation…

IEC 62037-3:2025

Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of passive intermod…

BS EN IEC 62037-1:2021

Passive RF and microwave devices, intermodulation level measurement - General requirements and measuring meth…

IEC 62037-4:2012

Passive RF and microwave devices, intermodulation level measurement - Part 4: Measurement of passive intermod…