IEC PAS 63267-3-30:2021 PDF

Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-30: End face geometry - Angled PC end face PPS rectangular ferrule multimode A1b fibres

Название (английский):

IEC PAS 63267-3-30:2021

Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-30: End face geometry - Angled PC end face PPS rectangular ferrule multimode A1b fibres

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 11
Дата публикации:: 27 мая 2021 г.
Издание:: IEC PAS 63267 edition 1 version 1
ICS:: 33.180.20

Тип поставки:

Full version165 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:165 €

Описание (английский):

IEC PAS 63267-3-30:2021 which is a publicly available specification, certain dimensional limits of an 16F MM angled PC rectangular polyphenylene sulphide (PPS) ferrule optical interface in order to meet specific longitudinal offset requirements for fibre-to-fibre interconnection. Ferrules made from the material specified in this document are suitable for use in categories C, OP, OP+, I and E as defined in IEC 61753‑1. Ferrule interface dimensions and features are contained in IEC 61754 (all parts), which deals with fibre optic connector interfaces.

Технические детали

Технический комитет: SC 86B - Fibre optic interconnecting devices and passive components
SKU: IEC PAS 63267-3-30:2021

Abstract

Overview

IEC PAS 63267-3-30:2021 is a Publicly Available Specification that defines end‑face geometry limits for a 16‑fibre multimode (A1b) angled PC end face in a rectangular polyphenylene sulfide (PPS) ferrule. It specifies dimensional tolerances required to control longitudinal offset between mating fibre arrays so that fibre‑to‑fibre contact and optical performance meet defined categories (C, OP, OP+, I and E per IEC 61753‑1). The document targets a single‑row 16‑fibre ferrule with 0.25 mm pitch (variant 1116, nominal ferrule cross‑section 2.45 × 6.4 mm).

Key topics and requirements

End‑face geometry parameters that affect longitudinal offset: fibre protrusion, fibre array minus coplanarity, adjacent fibre height differential, end‑face x/y angles and radii, fibre tip spherical radius, axial force effects, and core dip.
Dimensional limits (central surface region 2.900 mm × 0.675 mm) - representative values in the PAS include:
- Minus coplanarity (CF): maximum 0.25 µm when

Overview

Key topics and requirements

End‑face geometry parameters that affect longitudinal offset: fibre protrusion, fibre array minus coplanarity, adjacent fibre height differential, end‑face x/y angles and radii, fibre tip spherical radius, axial force effects, and core dip.
Dimensional limits (central surface region 2.900 mm × 0.675 mm) - representative values in the PAS include:
- Minus coplanarity (CF): maximum 0.25 µm when

IEC PAS 63267-3-30:2021 PDF

Технические детали

Abstract

Overview

Key topics and requirements

Похожие стандарты

Abstract

Overview

Key topics and requirements

Похожие стандарты

Corrigendum 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: G…

Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 161: Electromagnetic compatibility

Corrigendum 1 - Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for…

Corrigendum 1 - Fibre optic interconnecting devices and passive components performance standard - Part 084-2:…

Corrigendum 1 - Photovoltaic (PV) modules - Ammonia corrosion testing

Corrigendum 1 - Connectors for electronic equipment - Part 02: Detail specification for 8-way, unshielded, fr…

Corrigendum 2 - Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers

Corrigendum 1 - Live working - Eye, face and head protectors against the effects of electric arc - Performanc…