ISO 10046:1996 PDF

Name: ISO 10046:1996 — Aircraft — Methodology of calculating cargo compartment volumes
SKU: ISO 10046:1996
Price: 25 EUR
Availability: InStock

Aircraft — Methodology of calculating cargo compartment volumes

Название (английский):

ISO 10046:1996

Aircraft — Methodology of calculating cargo compartment volumes

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 7
Дата публикации:: 26 декабря 1996 г.
Издание:: ISO IS 10046 edition 1 version 1
ICS:: 49.045

Тип поставки:

Full version105 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:105 €

Описание (английский):

Covers the methodology of calculating for the determination of the internal volumes of both the main deck and the lower deck aircraft cargo compartments. The minimum required clearance between the compartment envelope and the unit load devices (ULDs) is also stated in order to provide the maximum ULD external contour and the methodology to define the ULD internal volumes.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 10046:1996 specifies a uniform methodology for calculating aircraft cargo compartment volumes and defining the allowable external and internal envelopes for Unit Load Devices (ULDs). It covers both main deck and lower deck cargo compartments and sets minimum clearances and calculation rules so airlines, manufacturers and ground-handling organizations can consistently report and compare usable cargo volumes and ULD envelopes.

Key topics and technical requirements

Scope and intent: Defines usable internal volumes for main and lower deck cargo compartments and the maximum ULD external contour and internal volume methodology.

Usable volume vs. cumulative ULD volume: Internal compartment volumes may be listed as maximum usable volumes provided the compartment structure (floor, ceiling, sidewalls, bulkheads, nets and supports) can withstand bulk-cargo restraint loads for all flight and ground conditions (including 9g forward emergency landing). If not, reported volume must be derived from cumulative ULD volumes and marked with an asterisk (*).

Compartment envelope limits:

Usable length: length of floor designed to support bulk cargo; affected by barrier nets and bulkheads.
Usable height: minimum height between floor (or roller tops) and ceiling/lining; limited by loading doorway height.
Usable width: cross-sectional width, provided sidewall liners can withstand restraint loads; otherwise only width inboard of restraint devices is used.
Non-parallel sides: requires accurate cross-sections applied along the compartment length to compute volume.

Doorway and barrier effects: Volume lost due to doorway barriers must be included using planes that encompass barrier tie-down points.

ULD envelopes and clearances:

Containers require 51 mm (2 in) clearance to the minimum aircraft envelope; internal container volume = 93.5% of external envelope (not for forkliftable containers).
Palletized loads require 51 mm (2 in) clearance (and 51 mm setback from pallet edges for net hardware); pallet thickness assumptions: 20 mm commercial, 57 mm military.
Longitudinal clearances: 100 mm (4 in) where cargo aligns with aircraft structure (unless structure resists bulk loads); 150 mm (6 in) allowance for contour changes due to protrusions.

Reference vocabulary: Uses definitions from ISO 10254:1995 (Air cargo and ground equipment - Vocabulary).

Applications and users

ISO 10046:1996 is used to:

Standardize cargo capacity reporting for airlines and lessors (aircraft comparisons and marketing).

Define maximum ULD contours and volumes for ULD manufacturers and suppliers.

Support aircraft designers and certification teams when specifying cargo door sizing, restraint capability, and cargo handling systems.

Aid load planners, ground handlers and freight forwarders in planning stowage, ULD selection and handling procedures.

Primary users: aircraft manufacturers, airlines, MROs, ULD manufacturers, regulatory authorities, cargo planners and ground-handling organizations.

Related standards

ISO 10254:1995 - Air cargo and ground equipment - Vocabulary (normative reference)

IATA ULD specifications (IATA 50/Series) referenced for ULD contours and configurations

Keywords: ISO 10046:1996, aircraft cargo compartment, cargo volume calculation, ULD envelope, unit load device, pallet volume, container clearance, usable cargo volume, main deck, lower deck.

ISO 10046:1996 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

ISO 10254:1995

Air cargo and ground equipment — Vocabulary

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

ISO/ASTMTR52917-EB

Additive Manufacturing — Round Robin Testing — General Guidelines