ISO 10104:2018 PDF

Name: ISO 10104:2018 — Assembly tools for screws and nuts — Double-headed box wrenches, deep offset and modified offset — Outside dimensions
SKU: ISO 10104:2018
Price: 25 EUR
Availability: InStock

Assembly tools for screws and nuts — Double-headed box wrenches, deep offset and modified offset — Outside dimensions

Название (английский):

ISO 10104:2018

Assembly tools for screws and nuts — Double-headed box wrenches, deep offset and modified offset — Outside dimensions

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 5
Дата публикации:: 6 марта 2018 г.
Издание:: ISO IS 10104 edition 3 version 1
ICS:: 25.140.30

Тип поставки:

Full version75 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:75 €

Описание (английский):

ISO 10104:2018 specifies the overall length and the maximum head thickness for double-headed box wrenches, deep offset (Form B) and modified offset (Form A). NOTE The wrenches covered by this document are the ones identified in ISO 1703:2005 under reference numbers 1 1 02 06 0 and 1 1 02 05 0. ISO 10104:2018 does not cover technical specifications for these products. Technical specifications are given in ISO 1711‑1:2016, series A.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 10104:2018 specifies the outside dimensions for double-headed box wrenches used as assembly tools for screws and nuts. The standard covers both modified offset (Form A) and deep offset (Form B) double-headed box wrenches and defines overall lengths and the maximum head thicknesses for specified wrench pairings. It applies to the wrench types referenced in ISO 1703:2005 and is intended to ensure dimensional consistency for procurement, manufacturing and tool selection. The document does not set detailed technical specifications (those are in ISO 1711‑1:2016, series A).

Key Topics

Scope and purpose: Defines overall length (l) and maximum head thickness (e) for double-headed box wrenches (Forms A and B). It focuses on outside dimensions to promote interchangeability and consistent clearances.

Dimension rules: Table 1 in the standard lists lengths and maximum head thicknesses for nominal flat pairings (s × s) ranging from small pairings (e.g. 6 × 7) up to larger pairings (e.g. 55 × 60). For many nominal sizes, the overall length is determined by simple linear formulas - for example:

l = s × 9 + 80 mm (for certain pairings)
l = s × 9 + 60 mm (for larger pairings) Figure 1 is included as an illustrative example only and does not constrain manufacturer design.

Designation and marking: A compliant wrench must be designated with the reference to ISO 10104, the form (A or B) and the nominal pairing (s × s). Marking must include at least the nominal flat dimensions and the manufacturer or supplier name/mark.

Related dimensional standards: The standard references ISO 691 (tolerances on openings) and ISO 3318 (maximum head envelope widths) for complementary dimensional requirements.

Applications

ISO 10104:2018 is practical for:

Manufacturers designing and producing double-headed box wrenches to meet consistent length and head-thickness limits.

Procurement teams specifying tooling for maintenance, service kits, and assembly operations to ensure interchangeability.

Quality and inspection teams verifying compliance of wrench outside dimensions against a recognized international standard.

Technical writers and cataloguers who must label and designate wrenches correctly (example designation: "Clé ISO 10104, B 13 × 15").

Benefits include improved fit in confined spaces, predictable clearance for offset forms, and standardized marking for traceability.

Related Standards

ISO 1703:2005 - Nomenclature and designation for assembly tools (reference numbers referenced by ISO 10104).

ISO 1711‑1:2016, series A - Technical specifications for hand wrenches and sockets (detailed product specs).

ISO 691 - Tolerances for key openings and bit sockets.

ISO 3318 - Maximum head envelope widths for spanner heads.

For manufacturer guidance and procurement, consult ISO 10104:2018 together with the referenced ISO documents to cover tolerances, head envelopes and product technical specifications.

ISO 10104:2018 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

ISO 1703:2005

Assembly tools for screws and nuts — Designation and nomenclature

ISO 1711-1:2016

Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets

ISO 10104:2001

Assembly tools for screws and nuts — Double-headed, deep offset and modified offset, box wrenches — Length of…

BS ISO 69:1998

Cinematography. 16 mm motion-picture magnetic film. Cutting and perforating dimensions

ISO 3318:2009

Assembly tools for screws and nuts — Double-headed open-ended wrenches, double-headed box wrenches and combin…