ISO 10910:1995 PDF

Name: ISO 10910:1995 — Classification and designation of approximate chip control zones for indexable inserts with chipbreakers
SKU: ISO 10910:1995
Price: 25 EUR
Availability: InStock

Classification and designation of approximate chip control zones for indexable inserts with chipbreakers

Название (английский):

ISO 10910:1995

Classification and designation of approximate chip control zones for indexable inserts with chipbreakers

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 4
Дата публикации:: 13 апреля 1995 г.
Издание:: ISO IS 10910 edition 1 version 1
ICS:: 25.100.01

Тип поставки:

Full version60 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:60 €

Описание (английский):

Establishes a graph format used to develop diagrams depicting chipbreaker indexable insert performance. Establishes and codes classification zones. Does not serve as a specific guide to the practical application of chipbreaker insert products, but rather grant the user a sort of pre-selection, on a general level.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 10910:1995 establishes a standardized graphical format and a coded classification of approximate chip control zones for indexable inserts fitted with chipbreakers. The standard is intended to help suppliers and users produce and read performance diagrams that show the ranges of feed and depth of cut where chips are controlled. It is explicitly a tool for general pre-selection rather than a detailed application guide for specific chipbreaker products.

Key Topics

Graph format: A template graph (see standard figure) uses axes for feed (f) and depth of cut (ap) to map insert performance.

Feed and depth ranges cited in the standard: f = 0.025 mm/rev to 2.5 mm/rev; ap = 0.1 mm to 16 mm.

Classification zones: The diagram is divided into six classification zones, coded A through F. Each zone identifies the primary intended use where the insert achieves controlled chip formation.

Test conditions for diagrams: Diagrams are typically produced from a standardized cutting test. The standard specifies key test conditions such as:

Type of machining: external turning.
Workpiece material (example in the standard): C45 (see ISO 683-1).
Normalized hardness example: 180 HB to 200 HB.
Cutting speed: adapted to the workpiece material and noted on the diagram.
Minimum part diameter noted in the example: 100 mm.

Supplier responsibility: Suppliers classify a chipbreaker insert with a single zone code (A–F) that best represents its principal area of use. The standard allows suppliers to provide zone-based pre-selection information alongside their existing insert designations.

Applications

ISO 10910 is useful for:

Rapid pre-selection of indexable inserts with chipbreakers based on expected feed and depth of cut.

Creating and interpreting performance diagrams to communicate likely chip control behaviour.

Assisting tooling engineers and purchasers to shortlist insert families before detailed machining tests.

Standardizing the way suppliers present chip control data, improving comparability across products.

Practical users should note that actual chip form and control depend on the workpiece material, machining parameters, insert size and geometry; the standard’s diagrams provide a generalized starting point, not definitive application prescriptions.

Related Standards

ISO 3002-1 / ISO 3002-3: Basic cutting data and geometry references (tool angles, feed definitions).

ISO 1832: Designation of indexable inserts.

ISO 3685: Tools life testing methods (reference to chip form descriptions in annexes).

For specification and implementation, consult the full ISO 10910:1995 text and referenced ISO documents to ensure accurate test conditions and correct use of the coded zones.

ISO 10910:1995 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

SIST EN ISO 683-17:2023

Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-…

ISO 3002-1:1982/Amd 1:1992

Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General ter…

SIST EN ISO 30023:2021

Textiles - Qualification symbols for labelling workwear to be industrially laundered (ISO 30023:2021)

BS ISO 18325:2015

Geosynthetics. Test method for the determination of water discharge capacity for prefabricated vertical drain…

ISO 3685:1977

Tool-life testing with single-point turning tools