ISO 10955:1999 PDF
Aerospace — End-fittings and turnbarrels for aircraft control wire rope — Technical specification
Aerospace — End-fittings and turnbarrels for aircraft control wire rope — Technical specification
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Количество страниц:
- 13
- Дата публикации:
- 9 сентября 1999 г.
- Издание:
- ISO IS 10955 edition 1 version 1
- ICS:
- 49.035
This International Standard specifies the characteristics, the inspection and test methods as well as the quality assurance requirements for: end-fittings swaged on wire ropes, as specified in ISO 9737, ISO 9747, ISO 9748, ISO 9749, ISO 9759 and ISO 9760, wire rope turnbarrel parts, as specified in ISO 9736, ISO 9738, ISO 9757, ISO 9758 and ISO 9761, and wire rope turnbarrel assemblies (as defined in 3.1), used in aircraft controls. This International Standard is applicable to the parts cited above providing that reference is made to it in the product standard or the definition document.
Технические детали
- Технический комитет
- ISO/TC 20 - Aircraft and space vehicles
- SKU
- ISO 10955:1999
Похожие стандарты
Другие стандарты ISO
ISO 8689-1:2000
ДействующийWater quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…
Overview ISO 8689-1:2000, titled Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates, is…
ISO/ASTM51540-04(2012)
ОтменёнStandard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
Significance and Use4.1 The radiochromic liquid dosimetry system provides a means of measuring absorbed dose in materials (5-7). Under the influence of ionizing radiation, chemical reactions take pla…
ISO/ASTM51204-04
ДействующийStandard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
Significance and Use4.1 Food products may be treated with ionizing radiation, such as gamma-rays from 60Co or 137Cs sources, for numerous purposes, including control of parasites and pathogenic micro…
ISO/ASTM51431-05
ОтменёнStandard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…
Significance and Use4.1 Food products may be treated with acceleratorgenerated radiation (electrons and X-rays) for numerous purposes, including control of parasites and pathogenic microorganisms, in…
ISO/ASTM52628-20e1
ДействующийStandard Practice for Dosimetry in Radiation Processing
1.1 This practice describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance o…
ISO/ASTM52921-13(2019)
ДействующийStandard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Significance and Use 3.1 Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CN…
ISO/ASTMTR52917-EB
ДействующийAdditive Manufacturing — Round Robin Testing — General Guidelines
This document outlines the steps with regard to aspects of design to conduct and run a round robin study (RRS) to assess the degree of variability in an additive manufacturing material or process. Th…
ISO/ASTM52901-17(2023)
ДействующийStandard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts
Scope 1.1 This document defines and specifies requirements for purchased parts made by additive manufacturing. 1.2 It gives guidelines for the elements to be exchanged between the customer and the pa…