ISO 11084-1:1993 PDF

Name: ISO 11084-1:1993 — Graphic technology — Register systems for photographic materials, foils and paper — Part 1: Three-pin systems
SKU: ISO 11084-1:1993
Price: 25 EUR
Availability: InStock

Graphic technology — Register systems for photographic materials, foils and paper — Part 1: Three-pin systems

Название (английский):

ISO 11084-1:1993

Graphic technology — Register systems for photographic materials, foils and paper — Part 1: Three-pin systems

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 3
Дата публикации:: 22 апреля 1993 г.
Издание:: ISO IS 11084 edition 1 version 1
ICS:: 37.100.20

Тип поставки:

Full version45 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:45 €

Описание (английский):

Specifies the positions and dimensions for the pins and holes of three-pin register systems to achieve accurate positioning of originals, separations and printing plates on press and prepress equipment. Applies to punched materials, e.g. photographic materials, foils and papers; machines and devices for punching the above materials; machines and devices using register systems. Does not apply to punched metallic materials.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 11084-1:1993 - Graphic technology - Register systems for photographic materials, foils and paper - Part 1: Three-pin systems specifies the positions and dimensions for three-pin register systems used in prepress and press environments. The standard defines how to position centre and paired register holes and the corresponding register pins to achieve accurate alignment of originals, separations and printing plates on press and prepress equipment. It applies to punched non-metallic materials such as photographic materials, foils and papers, and to machines that punch or use these register systems. It does not apply to punched metallic materials.

Key topics and requirements

Scope and applicability: Targets punched photographic materials, foils and papers; excludes metallic printing plates.

Definitions: Clear terms for register system, register, register hole, register pin and register pin carrier to ensure consistent interpretation.

Hole and pin arrangement:

A three-pin system with a centre register hole plus one or more symmetric pairs of register holes along a punching centreline.
Pairs of register holes position material perpendicular to the punching centreline; dimensions between hole centres are specified for standard widths (figure guidance) and increase in 200 mm increments for larger sizes.
Punching is performed at the material margin; the distance from the punching centreline to the edge is not specified.

Form and tolerances:

Examples include rectangular holes (5 mm × 10 mm cited as meeting requirements) and allowable pin cross-sections (as per referenced figures).
Pin height and pin carrier thickness are not specified in this part.

Referenced standards: ISO 286-1 and ISO 286-2 (system of limits and fits) are normative references for tolerances and fits.

Applications and practical value

Prepress and repro houses: Ensure consistent placement of originals and colour separations when producing films, proofs and plates.

Press manufacturers and plate makers: Design equipment and fixtures that accept standard three-pin registers for interchangeability.

Punch machinery and tooling suppliers: Manufacture punching devices and jigs that create standardised register holes for predictable alignment.

Benefits:

Improves registration accuracy across suppliers and equipment.
Reduces waste by enabling consistent margins and repeatable positioning.
Promotes interoperability between punching devices, register pin carriers, and printing presses.

Related standards

ISO 286-1:1988 and ISO 286-2:1988 (system of limits and fits) - referenced for tolerances.

Future parts of ISO 11084 planned to cover two‑pin and combined systems (edge alignment and reduced margin systems).

Keywords: ISO 11084-1, three-pin register system, register holes, register pins, graphic technology, photographic materials, prepress, punching equipment, printing plate registration.

ISO 11084-1:1993 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and practical value

Who should use this standard

Related standards

Технические детали

ISO 286-1:1988

ISO system of limits and fits — Part 1: Bases of tolerances, deviations and fits

ISO 286-2:1988

ISO system of limits and fits — Part 2: Tables of standard tolerance grades and limit deviations for holes an…

SIST EN ISO 286-1:2010/AC:2014

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of…

ISO 286-2:2010/Cor 1:2013

Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of…

SIST ISO 11084-1:1997

Graphic technology -- Register systems for photographic materials, foils and paper -- Part 1: Three-pin syste…