ISO 11089:2010 PDF

Name: ISO 11089:2010 — Rubber, raw synthetic — Determination of antidegradants by high-performance liquid chromatography
SKU: ISO 11089:2010
Price: 25 EUR
Availability: InStock

Rubber, raw synthetic — Determination of antidegradants by high-performance liquid chromatography

Название (английский):

ISO 11089:2010

Rubber, raw synthetic — Determination of antidegradants by high-performance liquid chromatography

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 6
Дата публикации:: 21 мая 2010 г.
Издание:: ISO IS 11089 edition 2 version 1
ICS:: 83.040.10

Тип поставки:

Full version90 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:90 €

Описание (английский):

ISO 11089:2010 describes a procedure for the determination of the following antidegradants in raw synthetic rubbers: N‑alkyl-N'‑phenyl-p‑phenylenediamine; N‑aryl-N'‑aryl-p‑phenylenediamine; poly‑2,2,4‑trimethyl-1,2‑dihydroquinoline. Extender oils, when present, can interfere. The method, with modification if necessary, can be applied to the determination of other amine antidegradants.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 11089:2010 specifies a validated analytical procedure for determining antidegradants in raw synthetic rubber by high-performance liquid chromatography (HPLC). The standard targets N‑alkyl‑N'‑phenyl‑p‑phenylenediamines, N‑aryl‑N'‑aryl‑p‑phenylenediamines and poly‑2,2,4‑trimethyl‑1,2‑dihydroquinoline, and can be adapted to other amine antidegradants. It covers sample preparation, extraction, chromatographic conditions, calculation of results and precision data, and warns that extender oils can interfere with measurements.

Key topics and requirements

Scope: Quantitative determination of specified antidegradants in raw synthetic rubbers; method adaptable for other amine antidegradants.

Sample preparation: Thin-sheet milling to 0.25–0.5 mm; duplicate ~200 mg test portions; extraction in an ultrasonic bath for 3 h (temperature kept below 30 °C).

Extraction solvent: 2:1 (v/v) isopropanol : dichloromethane.

Chromatography:

Eluent A: methanol : 0.01 M aqueous ammonium acetate (1:1 v/v); Eluent B: methanol.
Gradient elution program defined in the standard (start 100% A → 100% B → return to 100% A).
Reverse‑phase HPLC column (examples: HYPERSIL ODS, SPHERI‑5 ODS); flow rate 0.25 mL/min; column temperature 40 °C; injection 10 µL.
Detector wavelengths: 233 nm for poly‑2,2,4‑trimethyl‑1,2‑dihydroquinoline and 295 nm for other antidegradants; 550 nm reference.

Quantification: Compare peak areas of sample extracts with those from a reference antidegradant solution of known mass; calculation uses the ratio of peak areas and masses to report percent antidegradant.

Precision: Interlaboratory data show repeatability r = 0.24 percentage points and reproducibility R = 0.36 percentage points (type 1 precision study).

Applications and users

Intended for quality control laboratories, rubber compounders, raw synthetic rubber manufacturers, independent testing laboratories and material researchers who need reliable quantification of stabilizers/antidegradants.

Useful for product compliance, formulation development, batch release testing and troubleshooting ageing/stability problems where antidegradant levels affect performance.

Note: users should account for potential interference from extender oils and confirm reference antidegradant composition matches the sample.

Related standards

ISO/TR 9272:2005 - referenced for precision determination procedures used in the interlaboratory test program.

ISO 11089:2010 replaces ISO 11089:1997 (second edition includes updated precision data).

Keywords: ISO 11089:2010, antidegradants, raw synthetic rubber, HPLC, high-performance liquid chromatography, 6PPD, DTPD, analytical method, precision, repeatability, reproducibility.

ISO 11089:2010 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and users

Related standards

Технические детали

ISO 11089:1997

Rubber, raw synthetic — Determination of anti-degradants by high-performance liquid chromatography

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

ISO/ASTMTR52917-EB

Additive Manufacturing — Round Robin Testing — General Guidelines