ISO 11126-5:2018 PDF
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 5: Nickel slag
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 5: Nickel slag
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 5
- Дата публикации:
- 7 сентября 2018 г.
- Издание:
- ISO IS 11126 edition 2 version 1
- ICS:
- 25.220.10
This document specifies requirements for nickel slag abrasives, as supplied for blast-cleaning processes. It specifies ranges of particle sizes and values for apparent density, Mohs hardness, moisture content, conductivity of aqueous extract and water-soluble chlorides. The requirements specified in this document apply to abrasives supplied in the "new" condition only. They do not apply to abrasives either during or after use. Test methods for non-metallic blast-cleaning abrasives are given in the various parts of ISO 11127. NOTE Although this document has been developed specifically to meet requirements for preparation of steelwork, the properties specified will generally be appropriate for use when preparing other material surfaces, or components, using blast-cleaning techniques. These techniques are described in ISO 8504‑2.
Abstract
Overview
ISO 11126-5:2018 specifies requirements for nickel slag non‑metallic abrasives supplied for abrasive blast‑cleaning, primarily to prepare steel substrates before painting. The standard covers new nickel and ferronickel slag abrasives (granulated or atomized), defining acceptable particle‑size ranges, physical properties and contamination limits. It is focused on ensuring abrasive quality and consistency for effective and safe surface preparation.
Key topics and requirements
- Abrasive designation and marking: Product IDs follow the format “Abrasive ISO 11126 N/Nl1 (or N/Nl2)/G or S [size range]” to indicate non‑metallic nickel or ferronickel slag, grit (G) or shot (S), and particle size (example: Abrasive ISO 11126 N/Nl1/G 0,2-1).
- Particle size and distribution: Defined size ranges and limits for oversize/undersize fractions (see Table 1 in the standard). Maximum particle size shall not exceed 3.15 mm; particles
Технические детали
- Технический комитет
- ISO/TC 35/SC 12 - Preparation of steel substrates before application of paints and related products
- SKU
- ISO 11126-5:2018
Похожие стандарты
Упомянутые в описании и другие стандарты ISO