ISO 1134:1993 PDF
Pears — Cold storage
Pears — Cold storage
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 8
- Дата публикации:
- 21 октября 1993 г.
- Издание:
- ISO IS 1134 edition 2 version 1
- ICS:
- 67.080.10
Gives guidance on conditions for the successful cold storage of varieties of pears (Pyrus communis Linnaeus) up to their use in the fresh state: conditions for harvesting and storage, optimum storage conditions, controlled-atmosphere storage, storage in plastic packages.
Abstract
Overview
ISO 1134:1993 - Pears - Cold storage provides practical, international guidance for the successful cold storage of common pear varieties (Pyrus communis) from harvest to fresh-market use. The standard covers harvesting criteria, optimum storage conditions (temperature, humidity, air circulation), controlled‑atmosphere (CA) storage, and storage in plastic packages, and includes informative Annexes A (example CA regimes) and B (grower role and common storage disorders).
Key topics and technical requirements
- Harvesting criteria: Maturity assessment by skin ground colour, flesh firmness (spring penetrometer), soluble solids (≥10% by refractometer), ease of separation and starch test (iodine/KI). Optimum harvest timing may vary by variety and region.
- Pre‑storage handling: Rapid removal of field heat and precooling; careful handling and sorting to put only sound, clean fruit into store.
- Storage temperature: Generally as low as possible without freezing; typical preferred range is about −1 °C to +0.5 °C. Temperature differences of 1 °C greatly affect storage duration.
- Relative humidity: Recommended 90–95% RH to limit shrivelling and mass loss.
- Air circulation and storage density: Typical storage density ~250 kg/m³ usable space; ventilation around 80–100 m³/h per tonne or an air circulation ratio of 20–30.
- Controlled‑atmosphere (CA) storage: Suggested CO2 and O2 guides (e.g., CO2 1–3%, O2 ~2–5%) depend on cultivar and local practice. Avoid CO2 >5% for varieties susceptible to “brown heart”; liners should be perforated and CO2 within liners kept ≤3% to prevent core browning.
- Ripening after storage: Recommended ripening temperatures 15–18 °C; ethylene treatment (commonly 1–2% at ~18 °C and ~90% RH) may accelerate uniform ripening.
- Plastic packaging: Suitable food-contact films with perforation can reduce mass loss and extend storage life by 4–8 weeks for some cultivars.
Applications and users
ISO 1134:1993 is useful for:
- Fruit growers and orchard managers setting harvest criteria and pre‑storage practices
- Cold‑store operators and packhouses optimizing storage regimes, ventilation and CA systems
- Cold‑chain logistics managers and exporters ensuring fruit quality during distribution
- Post‑harvest researchers and extension specialists addressing physiological disorders (scald, brown heart, internal browning) and storage loss reduction
- Food safety and quality managers aligning handling and storage to international good practice
Related standards
- ISO 2169:1981 - Fruits and vegetables: physical conditions in cold stores (definitions and measurement)
- AGRI/WP.1/EUR.STAN.1 - Revised European guidance for apples and pears (referenced in ISO 1134)
ISO 1134:1993 gives general, variety‑specific guidance and should be adapted by specialists to local climates and cultivar behavior for best results in pear cold storage.
Технические детали
- Технический комитет
- ISO/TC 34/SC 3 - Fruits and vegetables and their derived products
- SKU
- ISO 1134:1993
Похожие стандарты
Упомянутые в описании и другие стандарты ISO
ISO 2169:1981
ДействующийFruits and vegetables — Physical conditions in cold stores — Definitions and measurement
Overview ISO 2169:1981 - "Fruits and vegetables - Physical conditions in cold stores - Definitions and measurement" standardizes the physical factors and measurement practices used in industrial cold…
BS EN ISO 11343:2019
ДействующийAdhesives. Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge…
ISO 8689-1:2000
ДействующийWater quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…
Overview ISO 8689-1:2000, titled Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates, is…
ISO/ASTM51540-04(2012)
ОтменёнStandard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
Significance and Use4.1 The radiochromic liquid dosimetry system provides a means of measuring absorbed dose in materials (5-7). Under the influence of ionizing radiation, chemical reactions take pla…
ISO/ASTM51204-04
ДействующийStandard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
Significance and Use4.1 Food products may be treated with ionizing radiation, such as gamma-rays from 60Co or 137Cs sources, for numerous purposes, including control of parasites and pathogenic micro…
ISO/ASTM51431-05
ОтменёнStandard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…
Significance and Use4.1 Food products may be treated with acceleratorgenerated radiation (electrons and X-rays) for numerous purposes, including control of parasites and pathogenic microorganisms, in…
ISO/ASTM52628-20e1
ДействующийStandard Practice for Dosimetry in Radiation Processing
1.1 This practice describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance o…
ISO/ASTM52921-13(2019)
ДействующийStandard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Significance and Use 3.1 Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CN…