ISO 12017:2021 PDF

Name: ISO 12017:2021 — Plastics — Poly(methyl methacrylate) double- and triple-skin sheets — Test methods
SKU: ISO 12017:2021
Price: 25 EUR
Availability: InStock

Plastics — Poly(methyl methacrylate) double- and triple-skin sheets — Test methods

Название (английский):

ISO 12017:2021

Plastics — Poly(methyl methacrylate) double- and triple-skin sheets — Test methods

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 21
Дата публикации:: 24 июня 2021 г.
Издание:: ISO IS 12017 edition 2 version 1
ICS:: 83.140.10

Тип поставки:

Full version315 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:4 раб. дн. (перевод)

Цена:315 €

Описание (английский):

This document specifies the test methods for quality control of poly(methyl methacrylate) (PMMA) extruded double- and triple-skin flat sheets, obtained from colourless and coloured transparent, translucent and opaque grades of materials. The minimum sheet width is 600 mm. The main applications of these sheets are in building and agriculture (greenhouses).

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 12017:2021 defines standardized test methods for quality control of extruded poly(methyl methacrylate) (PMMA) double- and triple-skin flat sheets. It applies to colourless and coloured, transparent, translucent and opaque PMMA grades (homopolymers and MMA copolymers with ≥80 % MMA). The standard targets extruded sheets with a minimum width of 600 mm and is primarily intended for building and agricultural uses (notably greenhouses).

Key topics and technical requirements

Scope and materials: Applies to PMMA homopolymers and suitable copolymers; additives such as UV absorbers and pigments are allowed.

Standard test conditions: Measurements under 23 °C ± 2 °C and (50 ± 5) % RH (ISO 291 referenced).

Sampling and specimen prep: Sampling procedures should be agreed by parties; ISO 28590 and ISO 2859-1 are recommended. Specimen preparation follows ISO 2818 where applicable.

Dimensional tests:

Total thickness (measured every 200 mm across extrusion width; accuracy to 0.1 mm), minimum/maximum thickness, skin and rib thicknesses.
Width and length measurements to 0.1 mm.
Rib geometry (spacing, angles) and mass per unit area.

Physical and performance tests:

Curvature (sheet surface and edge), thermal resistance (steady-state), three-point bending (mechanical behavior and chemical compatibility), and internal stress evaluation.
Optical properties: luminous transmittance, colour and appearance (Annex A covers luminous transmittance determination).
Durability tests: weathering (e.g., xenon-arc per ISO 4892-2), fire resistance, sound insulation (ISO 10140 series referenced), and condensate formation.
Chemical compatibility with gaskets and sealants (including a bending test in Annex B).

Reporting: Test reports must reference ISO 12017:2021 and include identifying sample details and measured values (with stated accuracies).

Applications and who uses it

ISO 12017:2021 is used by:

Manufacturers and extrusion plants for in‑process quality control and specification compliance of double- and triple-skin PMMA sheets.

Independent test laboratories performing dimensional, optical, thermal and mechanical testing.

Specifiers, architects and greenhouse designers requiring certified material properties for building envelopes and agricultural glazing.

Procurement and certification bodies verifying conformity with industry performance requirements.

Practical value: standardized, repeatable test methods enable consistent product specifications, reliable performance comparisons, and clearer contractual requirements between suppliers and buyers.

Related standards

Normative and related references cited in ISO 12017:2021 include:

ISO 2818 (specimen preparation)

ISO 4892-2 (laboratory weathering-xenon-arc)

ISO 7823-2 (PMMA sheet types and characteristics)

ISO 8302 (thermal resistance - guarded hot plate)

ISO 10140-2 / ISO 10140-5 and ISO 12999-1 (acoustics and sound insulation)

Keywords: ISO 12017:2021, PMMA double-skin sheets, poly(methyl methacrylate) test methods, double- and triple-skin sheets, luminous transmittance, thermal resistance, bending test, weathering test, quality control.

ISO 12017:2021 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Технические детали

BS ISO 2910:2018

Cinematography. Screen luminance and chrominance for the projection of film motion pictures.

ISO 28590:2017

Sampling procedures for inspection by attributes — Introduction to the ISO 2859 series of standards for sampl…

SIST ISO 2859-1:2003/Amd 1:2020

Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality lim…

BS EN ISO 2818:2019

Plastics. Preparation of test specimens by machining.

ISO 4892-2:2013/Amd 1:2021

Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1: Classific…

SIST EN ISO 10140-3:2021

Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact s…

SIST EN ISO 7823-2:2003

Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets…

SIST ISO 8302:1997

Thermal insulation -- Determination of steady-state thermal resistance and related properties -- Guarded hot…