ISO 12645:1998 PDF

Name: ISO 12645:1998 — Graphic technology — Process control — Certified reference material for opaque area calibration of transmission densitometers
SKU: ISO 12645:1998
Price: 25 EUR
Availability: InStock

Graphic technology — Process control — Certified reference material for opaque area calibration of transmission densitometers

Название (английский):

ISO 12645:1998

Graphic technology — Process control — Certified reference material for opaque area calibration of transmission densitometers

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 10
Дата публикации:: 5 ноября 1998 г.
Издание:: ISO IS 12645 edition 1 version 1
ICS:: 37.100.01

Тип поставки:

Full version150 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:150 €

Описание (английский):

This International Standard defines requirements for a half-tone certified reference material which may be used for the opaque area percentage calibration of transmission densitometers or colorimeters for use in the graphic arts. This International Standard is not applicable to the calibration of transmission densitometers in terms of ISO standard diffuse density. NOTE Test methods for determining the opaque area percentage are given in the informative annex A.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 12645:1998 - Graphic technology - Certified reference material for opaque area calibration of transmission densitometers defines requirements for half‑tone reference materials used to calibrate transmission densitometers and colorimeters for determining the opaque area percentage in graphic‑arts half‑tone control patches. It specifies material, pattern, dimensional and metrological requirements, reporting and traceability rules for a reference material that can serve as a Certified Reference Material (CRM) when ISO 15790 requirements are also met.

Key topics and technical requirements

Purpose: Provide a check on tone‑value measurements (Murray–Davies approach) and correct for opal‑type interreflection effects that cause discrepancies between densitometer tone values and true opaque area percentages.

Materials & construction: Clear substrate with opaque half‑tone dots on one side; reflectance (front and second surface) ≤ 0.05 at normal incidence.

Thickness: Nominal 0.1 mm to 0.8 mm; variation across the CRM ≤ 0.01 mm.

Half‑tone pattern:

Screen ruling: 50 to 70 cm−1 (constant across the CRM).
Patch sizes: >5 mm diameter (10 mm preferred).
Required opaque area percentages: circular opaque dots at 20 or 25% and 50%; circular clear dots at 75 or 80%; plus 0% and 100% (2% and 98% recommended). ±1% allowed deviation on nominal values.

Optical specs: Fringe width ≤ 2 μm; solid (opaque) ISO status A density > 4.00; half‑tone core densities > 3.00; clear substrate diffuse density ≤ 0.04.

Accuracy & reporting: Report measured opaque area percentages with standard uncertainties ≤ 0.6%. Deviation between measured and labeled value ≤ 1% (for 5–95%) and ≤ 0.6% outside this range. Local uniformity: ≤ 0.6% difference between any two 2 mm areas.

Traceability: Results must be traceable to a national standardizing laboratory. Test methods are given in informative annex A (microscopy geometry and integrating‑sphere transmittance formulas); annex B gives a recommended densitometer calibration method (zeroing on a 50% patch).

Applications and users

Quality control in prepress, film duplication, image‑setting and platemaking workflows.

Calibration and verification of transmission densitometers, spectrophotometric colorimeters and spectrophotometers used in graphic arts.

Manufacturers of test equipment, printing houses, color‑management labs, and national metrology institutes seeking traceable CRM for half‑tone process control.

Useful where tone‑value consistency and reproducible dot gain/transfer across the process chain are required.

Related standards

ISO 12647‑1 (process control for half‑tone separations and measurement methods)

ISO 5‑2 (standard diffuse density instruments)

ISO 15790 (requirements for Certified Reference Materials)

CIE 17.4 (definitions used)

Keywords: ISO 12645:1998, certified reference material, opaque area calibration, transmission densitometer, colorimeter, half‑tone, graphic arts, tone value, Murray‑Davies, integrating sphere, CRM, traceability.

ISO 12645:1998 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

SIST ISO 15790:2010

Graphic technology and photography - Certified reference materials for reflection and transmission metrology…

SIST ISO 12647-1:2014

Graphic technology - Process control for the production of half-tone colour separations, proof and production…

ISO 5293:2004/Cor 1:2008

Conveyor belts — Determination of minimum transition distance on three idler rollers — Technical Corrigendum 1