ISO 12884:2000 PDF

Overview

ISO 12884:2000 specifies a validated procedure for measuring total polycyclic aromatic hydrocarbons (PAH) in ambient air by collecting both gas-phase and particle-phase PAH on a combined fine-particle filter backed by a sorbent trap and analysing the total extract by gas chromatography/mass spectrometry (GC/MS). The standard is designed for high-volume sampling and quantitative determination of trace-level PAH for monitoring and research.

Key topics and technical requirements

• Sampling configuration: fine-particle filter followed by a sorbent trap (PUF or XAD-2) to collect both particulate and vapor PAH. Co‑extraction of filter + sorbent is required to measure total PAH because volatilization from filters can occur.
• Flow rates & volumes: high-volume sampling in the range 100–250 L/min with total sample volumes up to 350 m3; validated sampling periods up to 24 h.
• Analytical method: combined Soxhlet extraction of filter and sorbent, concentration (e.g., Kuderna–Danish or validated alternatives), and analysis by GC/MS to quantify target PAH.
• Performance: method detection capability down to ≈0.05 ng/m3 (or lower) under recommended sampling volumes. Typical precision ≤ 25% and expanded uncertainty ≤ 50% (see Annex A).
• Limits & interferences:
  • Volatilization losses from filters are significant for lower‑molecular‑weight PAH; naphthalene and acenaphthene trap less efficiently (naphthalene sampling efficiency ≈ 35% for PUF, 60% for XAD‑2).
  • Matrix interferences, contaminated solvents/glassware, photodegradation, reactive gases (ozone/NOx) and tobacco smoke can affect results - routine blanks and stringent glassware/solvent controls are required.
• Safety: treat PAH as carcinogens; handle standards/samples with appropriate PPE, use glove boxes for pure compounds, and control solvent hazards (e.g., hexane in fume hood).

Practical applications and users

ISO 12884 is used for:

• Ambient air quality monitoring for urban, industrial and background sites.
• Epidemiological and exposure studies assessing human health risks from PAH.
• Source apportionment and emission studies where combined gas+particle PAH profiles are needed.
• Regulatory compliance and chemical surveillance by environmental agencies and accredited labs. Typical users: environmental laboratories, air monitoring networks, government agencies, academic researchers, and environmental consultancies performing PAH monitoring and GC/MS analyses.

Related standards and references

• ISO 6879:1995 - performance characteristics for air quality methods
• ISO 9169:1994 - determination of performance characteristics
• ISO/TR 4227:1989 - planning of ambient air quality monitoring

Keywords: ISO 12884:2000, ambient air PAH, polycyclic aromatic hydrocarbons, sorbent-backed filters, PUF, XAD-2, GC/MS analysis, high-volume sampling, PAH monitoring, total gas and particle-phase.