ISO 13225:2012 PDF

Name: ISO 13225:2012 — Geometrical product specifications (GPS) — Dimensional measuring equipment; Height gauges — Design and metrological characteristics
SKU: ISO 13225:2012
Price: 25 EUR
Availability: InStock

Geometrical product specifications (GPS) — Dimensional measuring equipment; Height gauges — Design and metrological characteristics

Название (английский):

ISO 13225:2012

Geometrical product specifications (GPS) — Dimensional measuring equipment; Height gauges — Design and metrological characteristics

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 23
Дата публикации:: 24 апреля 2012 г.
Издание:: ISO IS 13225 edition 1 version 1
ICS:: 17.040.30

Тип поставки:

Full version345 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:4 раб. дн. (перевод)

Цена:345 €

Описание (английский):

This International Standard specifies the most important design and metrological characteristics of height gauges (with analogue indication or digital indication) for linear-dimensional measurements perpendicular to a surface plate.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 13225:2012 - Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics - defines the essential design, construction and metrological requirements for height gauges (analogue or digital) used for linear measurements perpendicular to a surface plate. It is a GPS standard that helps manufacturers, purchasers and calibration/inspection laboratories manage and verify height-gauge performance for quality assurance and traceable measurement.

Key topics and technical requirements

Scope and definitions: Clear definition of a height gauge, intended use with a surface plate, and common variants (manual, motorized, force-controlled).

Design characteristics: Required manufacturer information and minimum specifications for main dimensions (width, depth, overall height, measuring range, probe extension, stylus length), instrument base, guidance/slider, fine adjustment and fixing devices.

Indicating devices: Requirements for analogue (vernier, circular) and digital indication, including scale intervals, labelling of units, display protocol for data output and recommended battery-life indication.

Measuring and scribing stylus: Interchangeable styli, wear-resistant measuring faces and sharp scribing edges.

Protection and field use: Recommendation to declare water/dust protection via IP code (IEC 60529) and air-bearing system data (pressure, consumption) where applicable.

Metrological characteristics: Manufacturer must specify Maximum Permissible Error (MPE) for relevant characteristics; MPEs should be expressed as continuous functions across the measuring range (per ISO 14978).

Conformance and calibration: Guidance on proving conformity, calibration references and uncertainty estimation consistent with ISO/IEC Guide 98-3 (GUM) and ISO 14253‑1/2.

Documentation: Requirements for marking and example annexes (error tests, data sheet, calibration procedures, GPS matrix relation).

Applications and practical value

Ensures consistent design and performance expectations for height gauges used in:

Quality control and inspection in manufacturing
Metrology and calibration labs
Toolrooms, mechanical workshops and precision engineering

Supports procurement (manufacturer–purchaser relationship), measurement traceability, routine calibration and verification, and integration of digital output into data-collection systems.

Useful for specifying instruments for tasks such as height measurement, scribing, and comparative gauging on a surface plate.

Related standards

ISO 14978 (GPS measuring equipment fundamentals)

ISO 1 (reference temperature)

ISO 14253‑1 / ISO 14253‑2 (inspection decision rules and uncertainty)

IEC 60529 (IP code)

ISO/IEC Guide 98‑3 (GUM) and ISO/IEC Guide 99 (VIM)

Keywords: ISO 13225, height gauges, geometrical product specifications, GPS, metrological characteristics, MPE, calibration, vernier scale, digital indication, surface plate.

ISO 13225:2012 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and practical value

Who should use this standard

Related standards

Технические детали

IEC 60529:1989

Degrees of protection provided by enclosures (IP Code)

SIST EN ISO 14978:2019

Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO…

SIST EN ISO 14253-1:2018

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment -…

BS ISO 10791-4:1998

Test conditions for machining centres. Accuracy and repeatability of positioning of linear and rotary axes.

SIST EN ISO 14253-2:2011/AC:2014

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment -…

SIST EN ISO 13225:2012

Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrol…