Overview
ISO 14314:2004 - Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements - defines safety requirements, verification methods and information for use for recoil starting equipment (recoil starters) intended for reciprocating internal combustion engines used in land, rail and marine applications. The standard excludes engines intended to propel road vehicles and aircraft but can apply to engines for construction and earth‑moving machines or other applications where no suitable international standard exists. ISO 14314:2004 is a Type C safety standard addressing hazards associated with the installation and operation of recoil starting systems and is primarily aimed at machines manufactured after its publication.
Key topics and technical requirements
- Scope and definitions: clear terms for recoil starting equipment, rope handle and engine assembly.
- Hazard identification: lists significant dangerous phenomena such as finger trapping, cutting/sheer edges, contact with rotating parts, poor operator posture, cable ejection and slips or falls.
- Handle and rope requirements:
- Handle must allow safe release (can be released without operator action if engine backfires).
- All handle surfaces must have radii ≥ 1.5 mm and be burr‑free.
- Surfaces within 100 mm of the handle (rest and operation positions) must be free of sharp edges; chamfers of 0.3 mm are acceptable.
- Engagement mechanism:
- Must automatically disengage after starting.
- Must be designed so engagement cannot occur while the engine is running.
- Guards and protectors:
- Access to rotating parts must be prevented with protectors complying with EN 1679‑1.
- Removable guards must require a tool to remove; installation details must be included in user information.
- Rope and fixation strength:
- Rope, fixings and handle must withstand two times the maximum force specified by the manufacturer.
- Materials must resist fuels, oils, weather, vibration and temperature encountered in service.
- Verification methods:
- Examination of drawings and installation diagrams, measurements and tests (functional test and static force test on the rope).
- Marking and user information:
- Provide mass, overall dimensions, maximum output torque, installation instructions.
- Marking must include manufacturer name/address, year of manufacture, type/series and instruction to read the manual. Symbols must be high contrast, relief ≥ 0.5 mm and legible at 500 mm.
Applications and users
Who uses ISO 14314:2004:
- Engine and recoil starter manufacturers
- OEMs of stationary, marine, rail and construction machinery
- Safety engineers, compliance officers and test labs performing conformity checks
- Design teams specifying safe starting systems for non‑road engines
ISO 14314 helps ensure safe design, installation and operation of recoil starting equipment, reducing injury risk from rope starters.
Related standards
- ISO 2710‑1, ISO 2710‑2 (internal combustion engine vocabulary)
- ISO 7967‑8 (starter systems vocabulary)
- EN 1679‑1 (engine guards), EN 292‑1/2 and EN 1070 (machine safety principles)
Keywords: ISO 14314:2004, recoil starting equipment, recoil starter, reciprocal internal combustion engines, safety requirements, installation, verification, marking.