ISO 14605:2013 PDF

Name: ISO 14605:2013 — Fine ceramics (advanced ceramics, advanced technical ceramics) — Light source for testing semiconducting photocatalytic materials used under indoor lighting environment
SKU: ISO 14605:2013
Price: 25 EUR
Availability: InStock

Fine ceramics (advanced ceramics, advanced technical ceramics) — Light source for testing semiconducting photocatalytic materials used under indoor lighting environment

Название (английский):

ISO 14605:2013

Fine ceramics (advanced ceramics, advanced technical ceramics) — Light source for testing semiconducting photocatalytic materials used under indoor lighting environment

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 7
Дата публикации:: 14 октября 2013 г.
Издание:: ISO IS 14605 edition 1 version 1
ICS:: 81.060.30

Тип поставки:

Full version105 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:105 €

Описание (английский):

ISO 14605:2013 specifies the light source and radiometer used in the performance evaluation of semiconducting photocatalytic materials used under an indoor lighting environment in a laboratory. A light source of an indoor lighting environment does not include the sunlight passing through the window glass.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 14605:2013 specifies the light source and radiometric measurement requirements for laboratory evaluation of semiconducting photocatalytic materials (fine/advanced ceramics) under an indoor lighting environment. The standard defines suitable fluorescent lamps, UV sharp cut‑off filters, measurement instruments and test/reporting conditions for assessing performance of indoor light‑active photocatalysts (artificial‑light driven photocatalysts). Note: “indoor lighting environment” excludes direct sunlight through windows.

Key topics and technical requirements

Lamp types and colour properties

Use halophosphate or triphosphor fluorescent lamps with correlated colour temperature ~3800–4500 K (F4000).
Triphosphor lamps should have CIE Ra > 80; halophosphate typical Ra ≈ 60.
Typical spectral power distributions are specified for reproducible testing.

UV sharp cut‑off filters

Two filter types defined:
- Type A: TLT ≈ 416 nm ± 5 nm; transmittance ≤ 0.1% at 400 nm; RoS ≈ 14 nm ± 5 nm; average transmittance 450–780 nm > 80%.
- Type B: TLT ≈ 392 nm ± 5 nm; transmittance ≤ 0.1% at 380 nm; RoS ≈ 14 nm ± 5 nm; average transmittance 420–780 nm > 80%.
If non‑standard filters are used, report spectral transmittance, product name/number, manufacturer and thickness.

Measurement instruments and units

Illuminance measured in lux (lx) using a calibrated illuminance meter traceable to national standards.
UV irradiance measured in W/m² or mW/cm² with a UV radiometer specified in ISO 10677.

Test conditions and procedures

Stabilize lamps for ≥15 minutes before measurement.
Measure illuminance and UV irradiance with and without UV filter; set test illuminance per the relevant material test standard.
Replace lamps when illuminance falls to 70% of initial value.
Monitor filter transmittance and replace or re‑measure periodically (filters can degrade under irradiation).

Reporting

Test reports must reference ISO 14605:2013 and include lamp/filter instrument details, transmission/emission data and measured illuminance/UV irradiance at the sample surface.

Applications and users

Intended for laboratories, materials scientists and manufacturers of fine/advanced ceramics who develop or certify indoor light‑active photocatalytic surfaces (self‑cleaning, antibacterial, deodorizing, pollutant removal).

Useful for quality assurance, product development, comparative performance testing and regulatory or certification testing where controlled indoor‑lighting photocatalytic performance must be demonstrated.

Related standards

ISO 10677 - Ultraviolet light source for photocatalyst testing

IEC 60081 - Fluorescent lamp performance specifications

CIE 13.3 - Colour rendering measurement methods

Keywords: ISO 14605:2013, light source, photocatalytic materials, indoor lighting, UV sharp cut‑off filter, illuminance meter, UV radiometer, fine ceramics, performance evaluation.

ISO 14605:2013 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

ISO 10677:2011

Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet light source for testing semicon…

IEC 60081:1997

Double-capped fluorescent lamps - Performance specifications

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies