ISO 14675:2003 PDF
Milk and milk products — Guidelines for a standardized description of competitive enzyme immunoassays — Determination of aflatoxin M1 content
Milk and milk products — Guidelines for a standardized description of competitive enzyme immunoassays — Determination of aflatoxin M1 content
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 5
- Дата публикации:
- 6 января 2003 г.
- Издание:
- ISO IS 14675 edition 1 version 1
- ICS:
- 67.100.10
ISO 14675|IDF186:2002 give guidelines on the use of screening methods used for the determination of aflatoxin M1 content in milk and milk products, based upon competitive enzyme immuno-assays. For legal purposes, positive enzyme immunoassay results require confirmation by an accepted reference method. However, depending on whether the test complies with the specifications given hereafter, enzyme immunoassays can be used for routine quality control, especially when the absence of aflatoxin M1 above the regulatory limit needs to be documented.
Abstract
Overview
ISO 14675:2003 / IDF 186:2003 provides guidelines for a standardized description and basic validation parameters of competitive enzyme immunoassays (EIAs/ELISAs) used to determine aflatoxin M1 in milk and milk products. The standard focuses on screening methods - primarily the common 96‑well microtitre plate competitive ELISA format - and explains requirements for sensitivity, specificity, precision, curve fitting and sample preparation. It emphasizes that positive EIA results must be confirmed by an accepted reference method for legal or regulatory purposes, while validated EIAs can be used for routine quality control and documentation that aflatoxin M1 levels are below regulatory limits.
Key Topics and Technical Requirements
- Assay format and principle
- Competitive enzyme immunoassay (96‑well microtitre plate); typical assay time 3–4 hours.
- Reagents
- Antibody: polyclonal or monoclonal.
- Labelled antigen: horseradish peroxidase (e.g., aflatoxin B- or M‑oxime–HRP conjugate).
- Sensitivity and specificity
- Target assay sensitivity: relative binding values around 80% at <20 ng/L and 50% at <50 ng/L.
- Cross‑reactivity: aflatoxin M1 = 100%; other aflatoxins occurring in milk < 20%.
- Statistical design and curve fitting
- Standards: ≥2 replicates, ≥6 dilutions including zero; concentration range typically 5–50 ng/L or broader.
- Curve fitting: four‑parameter logistic or cubic spline recommended (linear regression only on linear region).
- Precision and limits
- CV of repeatability (relative absorbance) <10%; reproducibility <20%.
- Sample performance targets: LOD <5 ng/kg (milk), LOQ <10 ng/kg (milk).
- Repeatability/reproducibility at the 200 ng/kg milk‑powder level: <100 ng/kg and <150 ng/kg respectively.
- Sample preparation and recovery
- Defat by centrifugation; reconstitute milk powder to milk; recovery >80% for 10–50 ng/kg range.
- Limitations
- Matrix effects and cross‑reactivity can cause false positives; confirmation by reference methods is required for legal action.
Applications and Who Uses It
- Routine quality control laboratories in the dairy industry documenting compliance with maximum limits for aflatoxin M1.
- Food safety and regulatory laboratories implementing screening before confirmatory testing.
- Test kit manufacturers and method developers standardizing performance claims for competitive ELISAs.
- Third‑party auditors and certification bodies assessing laboratory screening procedures.
Related Standards and References
- Published jointly by ISO and IDF (prepared with AOAC collaboration). For regulatory enforcement, EIA screening results should be confirmed by an accepted reference method (national or international reference methods/AOAC standards). For method validation and curve‑fitting details see the statistical references cited in ISO 14675:2003.
Keywords: ISO 14675, aflatoxin M1, ELISA, enzyme immunoassay, milk testing, competitive immunoassay, aflatoxin screening, 96‑well microtitre plate, limit of detection, method validation.
Технические детали
- Технический комитет
- ISO/TC 34/SC 5 - Milk and milk products
- SKU
- ISO 14675:2003
Похожие стандарты
Упомянутые в описании и другие стандарты ISO
BS EN ISO 14675:2003
ДействующийMilk and milk products. Guidelines for a standardized description of competitive enzyme immunoassays. Determi…
ISO 8689-1:2000
ДействующийWater quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…
Overview ISO 8689-1:2000, titled Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates, is…
ISO/ASTM51540-04(2012)
ОтменёнStandard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
Significance and Use4.1 The radiochromic liquid dosimetry system provides a means of measuring absorbed dose in materials (5-7). Under the influence of ionizing radiation, chemical reactions take pla…
ISO/ASTM51204-04
ДействующийStandard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
Significance and Use4.1 Food products may be treated with ionizing radiation, such as gamma-rays from 60Co or 137Cs sources, for numerous purposes, including control of parasites and pathogenic micro…
ISO/ASTM51431-05
ОтменёнStandard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…
Significance and Use4.1 Food products may be treated with acceleratorgenerated radiation (electrons and X-rays) for numerous purposes, including control of parasites and pathogenic microorganisms, in…
ISO/ASTM52628-20e1
ДействующийStandard Practice for Dosimetry in Radiation Processing
1.1 This practice describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance o…
ISO/ASTM52921-13(2019)
ДействующийStandard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Significance and Use 3.1 Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CN…
ISO/ASTMTR52917-EB
ДействующийAdditive Manufacturing — Round Robin Testing — General Guidelines
This document outlines the steps with regard to aspects of design to conduct and run a round robin study (RRS) to assess the degree of variability in an additive manufacturing material or process. Th…