ISO 15137:2005 PDF
Self-adhesive hanging devices for infusion bottles and injection vials — Requirements and test methods
Self-adhesive hanging devices for infusion bottles and injection vials — Requirements and test methods
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 7
- Дата публикации:
- 22 июля 2005 г.
- Издание:
- ISO IS 15137 edition 1 version 1
- ICS:
- 11.040.20
ISO 15137:2005 specifies requirements and test methods for self-adhesive hanging devices (SAHD) used in combination with infusion containers, e.g. infusion glass bottles (see ISO 8536-1). The purpose of ISO 15137:2005 is to establish a safe SAHD for prescribed infusion containers while administering their content so as to ensure a safe application for the patient and for the user.
Abstract
Overview
ISO 15137:2005 - "Self-adhesive hanging devices for infusion bottles and injection vials - Requirements and test methods" defines safety, performance and test requirements for self-adhesive hanging devices (SAHD) used with infusion containers (for example, infusion glass bottles per ISO 8536‑1). The standard ensures SAHDs provide a reliable, safe hanging solution during administration of liquid pharmaceutical products for both patient and user.
Key topics and requirements
- Scope & designation
- Applies to SAHDs combining an adhesive portion and a hanging portion; devices shall be marked “Self-adhesive hanging device ISO 15137”.
- Materials
- Materials must meet performance criteria; note that disinfection fluids or UV light can damage some materials.
- Surface and attachment
- Infusion container surface must be clean, dry and free of release agents.
- At least 95% of the adhesive area must contact the container; avoid wrinkles or bubbles.
- Load resistance
- Permanent load test: must not break or detach under specified load for 24 h.
- Short-term load test: must hold for 30 s under higher short-term load.
- Gravitational (fall) test: container hung and dropped 30 cm must not cause breakage or detachment.
-
Test weights depend on container volume:
Технические детали
- Технический комитет
- ISO/TC 76 - Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
- SKU
- ISO 15137:2005
Похожие стандарты
Упомянутые в описании и другие стандарты ISO