ISO 15734:2001 PDF

Name: ISO 15734:2001 — Ships and marine technology — Hydrostatic release units
SKU: ISO 15734:2001
Price: 25 EUR
Availability: InStock

Ships and marine technology — Hydrostatic release units

Название (английский):

ISO 15734:2001

Ships and marine technology — Hydrostatic release units

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 7
Дата публикации:: 31 мая 2001 г.
Издание:: ISO IS 15734 edition 1 version 1
ICS:: 47.020.99

Тип поставки:

Full version105 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:105 €

Описание (английский):

This International Standard specifies performance and testing requirements for hydrostatic release units used in conjunction with float-free lifesaving appliances including inflatable liferafts and Emergency Position Indicating Radio Beacons (EPIRB 's). Hydrostatic release units which comply with this International Standard and which have been formally approved by the cognizant Maritime Safety Administration may be considered to comply with the 1974 Safety Of Life At Sea Convention (SOLAS 74) and the IMO Life-Saving Appliances Code, as amended.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 15734:2001 specifies performance and testing requirements for hydrostatic release units (HRUs) used with float‑free lifesaving appliances such as inflatable liferafts and EPIRBs. HRUs that comply with this standard and are formally approved by the relevant Maritime Safety Administration may be considered to meet the requirements of SOLAS 1974 and the IMO Life‑Saving Appliances (LSA) Code. The standard covers construction, marking, servicing, prototype and production testing, installation inspection and weak‑link requirements.

Key topics and technical requirements

Scope: Performance and testing for HRUs for liferafts and Emergency Position Indicating Radio Beacons (EPIRBs).

Construction & materials:

Corrosion‑resistant materials compatible with seawater, oil and detergents.
Drains to prevent water accumulation in the hydrostatic chamber.
Operability over air temperature −30 °C to +65 °C and seawater −1 °C to +30 °C.
Automatic release at a depth of not more than 4 m; no premature release from surface wash‑over.

Markings & documentation:

Permanent marking of manufacturer, type, serial number, manufacture date and capacity limits; expiry marking for disposable types.
Operating and maintenance instructions and a servicing record plate for annual service units.

Weak link:

Materials resistant to corrosion; cordage ends whipped/heat treated or wire ends secured with thimbles and ferrules.
Tensile‑break strength between 1.8 kN and 2.6 kN.

Prototype tests (sequence includes):

Corrosion resistance: salt spray per ISO 9227 (5% NaCl, +35 °C for 160 h).
Temperature cycling: alternating half‑cycles at −30 °C and +65 °C.
Submergence & manual release: release between 1.5 m and 4 m depth; inspection for degradation.
Strength test: tensile load (minimum 10 kN for 30 min, increased to 15 kN for liferafts approved for >25 persons).
Membrane tests: cold flexing and heat exposure; resistance to oil, seawater and detergents.

Production tests:

Visual/dimensional sampling and submergence tests for reusable and disposable units; sample rejection criteria apply.
Weak‑link lot testing: minimum five samples; all must break within the specified 1.8–2.6 kN range.

Installation:

Must be removable for servicing, not permanently secured; allow release without tools; weak link must not become part of painter until raft floats free.

Applications and who uses ISO 15734:2001

Manufacturers of HRUs, liferafts and EPIRBs use the standard to design, test and certify equipment.

Shipowners and operators reference it when procuring lifesaving appliances to ensure SOLAS/IMO compliance.

Classification societies, flag state authorities and maritime inspectors use it for type approval and installation checks.

Marine equipment suppliers, shipyards and third‑party test labs rely on the specified prototype and production test methods.

Practical uses: product development, conformity assessment, routine production quality control, installation guidance, and maintenance/servicing protocols.

Related standards

ISO 9227 (salt spray corrosion testing)

SOLAS 1974 and IMO Life‑Saving Appliances (LSA) Code (for regulatory compliance)

Keywords: ISO 15734:2001, hydrostatic release units, liferaft HRU, EPIRB, SOLAS compliance, IMO LSA Code, marine safety testing, corrosion resistance, submergence test, weak link strength.

ISO 15734:2001 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses ISO 15734:2001

Related standards

Технические детали

SIST EN ISO 9227:2023/A1:2024

Corrosion tests in artificial atmospheres - Salt spray tests - Amendment 1: Footnote of warning (ISO 9227:202…

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

ISO/ASTMTR52917-EB

Additive Manufacturing — Round Robin Testing — General Guidelines