ISO 15759:2005 PDF

Name: ISO 15759:2005 — Medical infusion equipment — Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process
SKU: ISO 15759:2005
Price: 25 EUR
Availability: InStock

Medical infusion equipment — Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process

Название (английский):

ISO 15759:2005

Medical infusion equipment — Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 17
Дата публикации:: 8 апреля 2005 г.
Издание:: ISO IS 15759 edition 2 version 1
ICS:: 11.040.20

Тип поставки:

Full version255 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:255 €

Описание (английский):

ISO 15759:2005 specifies the dimensional and functional requirements for plastics caps with inserted elastomeric liners, attached to the infusion container [blow-fill-seal (BFS) container] by welding or by collar technique. These caps are intended for use in the packaging and handling of liquid drugs for parenteral delivery.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 15759:2005 specifies dimensional and functional requirements for plastics caps with inserted elastomeric liners used on infusion containers manufactured by the blow–fill–seal (BFS) process. Applicable to caps attached by welding (Form A) or by collar technique (Form B), the standard covers cap and liner geometry, materials guidance, and performance tests for safe packaging and handling of liquid drugs for parenteral delivery.

Key topics and technical requirements

Scope and designation

Covers caps for BFS containers (designated e.g., “Cap ISO 15759‑BFS‑A/B”) and liners (Elastomeric liner ISO 15759).

Dimensions and tolerances

Defined drawings and tolerances for Form A and Form B caps and typical liner geometry; general tolerances per ISO 2768‑1 and ISO 3302‑1.

Materials

Caps: plastics that are physiologically harmless.
Liners: meet at least Type II extractables requirements per ISO 8871‑1.

Physical and functional tests (normative annexes)

Leak-resistance (Annex A): no penetrant leakage of the covered piercing area.
Opening force (Annex B): lid removal force ≤ 80 N; recorded average and maximum values.
Fragmentation / Coring (Annex C): ≤ 7 fragments ≥ 50 µm per 10 piercings.
Penetration force (Annex D): individual ≤ 80 N, average ≤ 75 N.
Dynamic and static spike‑retention (Annexes E & F): dynamic retention ≥ 15 N; static test shows no leakage and the spike must not fall out during 4 h.
Resealability (Annex G): no air escape after re-sealing.

Other requirements

Packaging, storage (per ISO 2230), and marking; biological testing is not prescribed by ISO 15759 but must follow national pharmacopeia or regulatory requirements where applicable.

Applications and who uses it

Manufacturers of BFS infusion containers, caps and elastomeric liners

Medical device and pharmaceutical packaging designers and quality engineers

Regulatory and compliance teams assessing parenteral packaging components

Suppliers of closures, elastomeric components and piercing spikes

ISO 15759 helps ensure safe administration (parenteral delivery) by specifying reproducible cap/liner performance - critical for leak prevention, contamination control, spike retention and user handling.

Related standards

ISO 48 (rubber hardness)

ISO 2230 (storage of rubber parts)

ISO 2768‑1 (general tolerances)

ISO 3302‑1 (rubber dimensional tolerances)

ISO 7500‑1 (verification of testing machines)

ISO 7864 (sterile hypodermic needles)

ISO 8871‑1 (elastomeric parts extractables for parenterals)

Keywords: ISO 15759:2005, medical infusion equipment, blow–fill–seal (BFS), plastics caps, elastomeric liner, parenteral packaging, leak-resistance, coring, spike retention.

ISO 15759:2005 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Технические детали

ISO 15759:2002

Medical infusion equipment — Plastics caps with inserted elastomeric liner for containers manufactured by the…

SIST ISO 2768-1:1999

General tolerances -- Part 1: Tolerances for linear and angular dimensions without individual tolerance indic…

ISO 3302-1:1996/Amd 1:2001

Rubber — Tolerances for products — Part 1: Dimensional tolerances — Amendment 1: Classification system for fl…

SIST EN ISO 8871-1:2005

Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 1: Extractables in aqueous au…

BS ISO 22303:2008

Tobacco. Determination of tobacco specific nitrosamines. Method using buffer extraction.

ISO 4885:2026

Ferrous materials — Heat treatments — Vocabulary

SIST EN ISO 7500-1:2018

Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compr…

SIST EN ISO 7864:2016

Sterile hypodermic needles for single use - Requirements and test methods (ISO 7864:2016)