ISO 15817:2012 PDF

Name: ISO 15817:2012 — Earth-moving machinery — Safety requirements for remote operator control systems
SKU: ISO 15817:2012
Price: 25 EUR
Availability: InStock

Earth-moving machinery — Safety requirements for remote operator control systems

Название (английский):

ISO 15817:2012

Earth-moving machinery — Safety requirements for remote operator control systems

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 10
Дата публикации:: 13 января 2012 г.
Издание:: ISO IS 15817 edition 2 version 1
ICS:: 53.100

Тип поставки:

Full version150 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:150 €

Описание (английский):

ISO 15817:2012 specifies the essential safety requirements for remote operator control systems used on earth-moving machinery as defined in ISO 6165. It is not applicable to autonomous control systems that enable a machine to work without the assistance of an operator, nor does it apply to the remote control of attachments on non-remote controlled machines.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 15817:2012 - "Earth-moving machinery - Safety requirements for remote operator control systems" - specifies essential safety requirements for remote operator control systems used on earth-moving machinery (as defined in ISO 6165). It applies to wired and wireless remote operator control systems but explicitly excludes autonomous control systems (machines operating without an operator) and remote control of attachments on otherwise non-remote-controlled machines.

Key topics and technical requirements

Machine stop and fail-safe behavior

Remote systems must prevent powered movement if controls are inactive, power or signal is lost, or interlocks fail.
Restoring power or signal must not cause unintended motion; resumption requires an intentional operator reset.

Signal integrity and EMC

Data links must include error detection/correction and continual integrity verification; loss of integrity forces stop until reset.
Conformance with ISO 13766 (electromagnetic compatibility) is required.

Remote control box & receiving unit

Only one remote control box may control movement at a time.
Controls must return to neutral (or use hold-to-run / detent for permitted functions) and be clearly marked per ISO 6405-1/2.
Protection against unintended and unauthorized actuation (key switch, access code) is required.

Emergency and remote stop

Remote stop must be present on the remote control box (red marking) and fail-safe; emergency stop devices on the machine to ISO 13850 where practicable.

Operating range, warnings and visibility

Wireless operating range must keep the operator outside the hazard zone and be stated in the operator’s manual.
Visual (uniquely colored beacon/strobe) and audible warnings must indicate remote operation and be visible/audible to approaching personnel.

Environmental & mechanical robustness

Remote control box minimum protection IP65; receiving unit IP54 (if inside cab) or IP65 otherwise (IEC 60529).
Devices must withstand shocks, vibration and drop tests per referenced IEC/ISO test methods.

Control selection and on-machine override

Safe switching between direct and remote control, interlocks to prevent inadvertent selection, and an on-machine override to deactivate remote control are required.

Travelling limits

If operator travels with the machine (wireless), maximum travel speed ≤ 10 km/h.

Applications and users

Useful for manufacturers, OEMs, safety engineers and equipment integrators designing or certifying remote-control systems for excavators, loaders, graders and other earth-moving machinery.

Relevant to site safety officers, procurement teams and maintenance personnel evaluating compliance, operator manuals, labeling and safe operating procedures for remote-controlled earth-moving equipment.

Related standards

ISO 6165 - machine types & terms

ISO 15998 - machine-control systems using electronic components (functional safety guidance)

ISO 6405-1/2 - control/display symbols

ISO 13766 - EMC for earth-moving machinery

ISO 13850 - emergency stop principles

IEC 60529 - IP (enclosure protection) ratings

Keywords: ISO 15817:2012, remote operator control systems, earth-moving machinery, safety requirements, remote control box, receiving unit, signal integrity, emergency stop, IP65, EMC.

ISO 15817:2012 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

SIST EN ISO 6165:2022

Earth-moving machinery - Basic types - Identification and vocabulary (ISO 6165:2022)

BS EN ISO 13766-1:2018

Earth-moving and building construction machinery. Electromagnetic compatibility (EMC) of machines with intern…

ISO 6405-1:2017/Amd 1:2022

Earth-moving machinery — Symbols for operator controls and other displays — Part 1: Common symbols — Amendmen…

BS EN ISO 13850:2015

Safety of machinery. Emergency stop function. Principles for design.

IEC 60529:1989

Degrees of protection provided by enclosures (IP Code)

PD ISO/TS 15998-2:2012

Earth-moving machinery. Machine control systems (MCS) using electronic components - Use and application of IS…