ISO 15973:2000 PDF

Name: ISO 15973:2000 — Closed end blind rivets with break pull mandrel and protruding head — AlA/St
SKU: ISO 15973:2000
Price: 25 EUR
Availability: InStock

Closed end blind rivets with break pull mandrel and protruding head — AlA/St

Название (английский):

ISO 15973:2000

Closed end blind rivets with break pull mandrel and protruding head — AlA/St

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 5
Дата публикации:: 21 декабря 2000 г.
Издание:: ISO IS 15973 edition 1 version 1
ICS:: 21.060.40

Тип поставки:

Full version75 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:75 €

Описание (английский):

La présente Norme internationale spécifie les caractéristiques dimensionnelles et mécaniques ainsi que les données d'application pour les rivets aveugles à rupture de tige à corps fermé, à tête bombée, avec un corps en alliage d'aluminium (AIA) et une tige en acier (St), de diamètres nominaux compris entre 3,2 mm et 6,4 mm inclus.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 15973:2000 specifies closed end blind rivets with a break-pull mandrel and a protruding (domed) head, designated AIA/St - that is, a body made of aluminium alloy (AlA) and a mandrel/rod made of steel (St). The standard covers nominal diameters from 3.2 mm to 6.4 mm and defines dimensional, mechanical and application data needed for design, procurement and inspection of these blind rivets.

Key topics and requirements

Product scope: Closed end blind rivets, break pull mandrel, protruding (domed) head, Al-alloy body with steel mandrel; nominal d = 3.2, 4.0, 4.8 and 6.4 mm.

Dimensions: Detailed dimensions for rivet body, head and recommended grip ranges are given (see Figure 1 / Table 1 in the standard).

Hole diameters: Specified running hole diameters for proper fit (Table 2). Example minima/maxima:

d = 3.2 mm → h1 min 3.3 mm, h1 max 3.4 mm
d = 4.0 mm → h1 min 4.1 mm, h1 max 4.2 mm
d = 4.8 mm → h1 min 4.9 mm, h1 max 5.0 mm
d = 6.4 mm → h1 min 6.5 mm, h1 max 6.6 mm

Mechanical properties: Minimum shear and tensile (and maximum mandrel break) loads specified per diameter if tested per ISO 14589 (Table 3). Example values:

3.2 mm: shear ≥ 1 100 N, tensile ≥ 1 450 N, mandrel break ≤ 3 500 N
6.4 mm: shear ≥ 3 600 N, tensile ≥ 4 900 N, mandrel break ≤ 10 230 N

Material & finish: Body in aluminium alloy, mandrel in steel; surface natural with protective treatment for storage. Specific alloy selection is left to the manufacturer.

Quality & inspection: Rivets must be free from harmful burrs/defects and not show cracks after installation (×5 magnification). Acceptance inspection recommended per ISO 3269; mechanical testing per ISO 14589. Terminology follows ISO 14588.

Design guidance: Informative Annex A provides formulas for head and shank dimensions and hole tolerances.

Applications and users

ISO 15973 is intended for:

Fastener manufacturers and suppliers specifying rivet geometry and performance (AIA/St blind rivets).

Design and mechanical engineers selecting blind rivets for assemblies with access to one side only.

Quality/inspection teams performing incoming inspection and mechanical testing.

Industries using blind rivets: automotive, rail, aerospace subassemblies, building envelope systems, electronics enclosures, and general sheet-metal fabrication.

Practical uses include joining thin sheets and components where a closed-end rivet (sealing capability) and reliable pull-break mandrel performance are required.

Related standards

ISO 14588 - Blind rivets: terminology and dimension symbols

ISO 14589 - Blind rivets: mechanical tests

ISO 3269 - Fasteners: acceptance inspection

Keywords: ISO 15973, closed end blind rivets, break pull mandrel, AIA/St, aluminium alloy body, steel mandrel, rivet dimensions, rivet shear tensile loads, rivet hole diameter, blind rivet standard.

ISO 15973:2000 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and users

Related standards

Технические детали

SIST EN ISO 14589:2002

Blind rivets - Mechanical testing (ISO 14589:2000)

BS EN ISO 3269:2019

Fasteners. Acceptance inspection.

SIST EN ISO 14588:2002

Blind rivets - Terminology and definitions (ISO 14588:2000)

SIST EN ISO 15973:2002

Closed end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15973:2000)