ISO 15984:2002 PDF

Name: ISO 15984:2002 — Open end blind rivets with break pull mandrel and countersunk head — A2/A2
SKU: ISO 15984:2002
Price: 25 EUR
Availability: InStock

Open end blind rivets with break pull mandrel and countersunk head — A2/A2

Название (английский):

ISO 15984:2002

Open end blind rivets with break pull mandrel and countersunk head — A2/A2

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 6
Дата публикации:: 22 октября 2002 г.
Издание:: ISO IS 15984 edition 1 version 1
ICS:: 21.060.40

Тип поставки:

Full version90 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:90 €

Описание (английский):

ISO 15984 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an austenitic stainless steel body (A2) and an austenitic stainless steel mandrel (A2) and with nominal diameters from 3 mm up to and including 5 mm.

Abstract

Overview

Key topics and technical requirements

Dimensions and tolerances: Detailed dimensions for body, head and stem are given (see Figure/Table in the standard). Design formulas and tolerances for head diameter, body diameter and head height are provided in informative Annex A.
Nominal sizes covered: d = 3, 3.2, 4, 4.8 and 5 mm with corresponding dimensional limits.
Mechanical characteristics: Minimum shear and tensile loads and maximum stem break loads are specified per nominal diameter (e.g., shear and tensile minimums increase with diameter - numeric values are given in the standard’s Table 3).
Hole diameters and fit: Recommended hole (clearance) diameters for assembled components are specified; non‑conformant hole sizes may reduce shear/tensile capacity or complicate assembly.
Material and surface: Both rivet body and mandrel must be austenitic stainless steel (A2) per ISO 3506‑1; surface finish of body and mandrel is specified as raw.
Performance tests and acceptance: Mechanical tests (per ISO 14589) and acceptance inspection (per ISO 3269) are referenced. Requirements include stem retention before installation, head retention after installation and absence of cracking at ×5 magnification.
Designation example: A standardized way to mark/identify rivets (e.g., “Rivet blind ISO 15984 - 4 ×××× 12 - A2/A2”).

Applications and practical value

Ensures consistent performance for stainless steel countersunk blind rivets used where a flush head is required and access is available from only one side.
Commonly applied in industries that require corrosion resistance and reliable blind fastening: building envelopes, enclosures, transportation, marine, electrical cabinets and general assembly work.
Helps designers and procurement specify correct rivet size, hole clearance and grip range to meet load requirements and assembly reliability.

Who should use this standard

Fastener manufacturers and quality control teams
Mechanical engineers and design engineers specifying blind fastenings
Purchasing/procurement professionals and suppliers
Test laboratories verifying rivet performance to ISO requirements

Related standards

ISO 3506‑1 (mechanical properties of corrosion‑resistant fasteners - A2)
ISO 14588 (blind rivets - terminology)
ISO 14589 (blind rivets - mechanical tests)
ISO 3269 (fasteners - acceptance inspection)

Keywords: ISO 15984:2002, open end blind rivets, break pull mandrel, countersunk head, A2/A2, stainless steel rivets, rivet dimensions, shear and tensile loads.

Технические детали

Технический комитет: ISO/TC 2 - Fasteners
SKU: ISO 15984:2002

Главная

Каталог

SIST EN ISO 3506-1:2020

Действующий

Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws an…

Overview EN ISO 3506-1:2020 - Fasteners: Mechanical properties of corrosion‑resistant stainless steel fasteners - Part 1 covers the mechanical and physical requirements for bolts, screws and studs ma…

47 · PDF

97 €

SIST EN ISO 14589:2002

Действующий

Blind rivets - Mechanical testing (ISO 14589:2000)

Overview EN ISO 14589:2000 - Blind rivets: Mechanical testing specifies standardized mechanical test methods for blind rivets (nominal diameters up to and including 6.4 mm). Adopted by CEN from ISO 1…

17 · PDF

66 €

BS EN ISO 3269:2019

Действующий

Fasteners. Acceptance inspection.

20 · PDF

50 €

SIST EN ISO 15984:2003

Действующий

Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002)

Overview EN ISO 15984:2002 (ISO 15984:2002) specifies dimensional, mechanical and application data for open end blind rivets with break pull mandrel and countersunk head, manufactured from austenitic…

8 · PDF

44 €

SIST EN ISO 14588:2002

Действующий

Blind rivets - Terminology and definitions (ISO 14588:2000)

Overview SIST EN ISO 14588:2002 - Blind rivets - Terminology and definitions (ISO 14588:2000) - is an internationally recognized standard developed by the European Committee for Standardization (CEN)…

18 · PDF

66 €

Открыть превью (2 стр.)

ISO 15984:2002 PDF

Abstract

Overview

Похожие стандарты

Key topics and technical requirements

Applications and practical value

Who should use this standard

Related standards

Технические детали

SIST EN ISO 3506-1:2020

Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws an…

SIST EN ISO 14589:2002

Blind rivets - Mechanical testing (ISO 14589:2000)

BS EN ISO 3269:2019

Fasteners. Acceptance inspection.

SIST EN ISO 15984:2003

Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002)

SIST EN ISO 14588:2002

Blind rivets - Terminology and definitions (ISO 14588:2000)