ISO 16110-2:2010 PDF

Name: ISO 16110-2:2010 — Hydrogen generators using fuel processing technologies — Part 2: Test methods for performance
SKU: ISO 16110-2:2010
Price: 25 EUR
Availability: InStock

Hydrogen generators using fuel processing technologies — Part 2: Test methods for performance

Название (английский):

ISO 16110-2:2010

Hydrogen generators using fuel processing technologies — Part 2: Test methods for performance

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 38
Дата публикации:: 5 февраля 2010 г.
Издание:: ISO IS 16110 edition 1 version 1
ICS:: 71.020

Тип поставки:

Full version570 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:7 раб. дн. (перевод)

Цена:570 €

Описание (английский):

ISO 16110-2:2010 provides test procedures for determining the performance of packaged, self-contained or factory matched hydrogen generation systems with a capacity less than 400 m3/h at 0 °C and 101,325 kPa, referred to as hydrogen generators, that convert a fuel to a hydrogen‑rich stream of composition and conditions suitable for the type of device using the hydrogen (e.g. a fuel cell power system, or a hydrogen compression, storage and delivery system).

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview - ISO 16110-2:2010 (Hydrogen generators | Test methods for performance)

ISO 16110-2:2010 specifies standardized test methods for performance of packaged, self-contained or factory‑matched hydrogen generators that convert a fuel into a hydrogen‑rich stream. It applies to stationary hydrogen generators with capacity less than 400 m3/h (at 0 °C and 101 325 kPa). The standard defines the test boundary, measurement techniques, test plans, procedures, calculations (including efficiency) and reporting requirements to ensure repeatable, comparable performance data for systems used with fuel cells, compression/storage systems or other hydrogen users.

Key technical topics and requirements

Scope & system boundary: Clear definition of which subsystems and energy/recovery streams are included (fuel, air/oxidant, steam, cooling, electrical inputs, hydrogen output, waste heat, etc.).

Measurement techniques: Requirements for instruments and methods to measure electrical power, fluid flow rates, temperatures, pressures and gas composition; conformity with referenced standards is required.

Fluid composition & heating value: Procedures for measuring or calculating composition and heating value of input fuels and output hydrogen‑containing streams (natural gas analysis referenced to ISO 6974 / ISO 6975).

Operational states: Definitions and tests for cold state, start‑up time, standby state and steady‑state production.

Test plan & uncertainty: Guidance on test modes, frequency, duration and uncertainty analysis to meet measurement targets.

Safety & execution: Safe operation of generator and test equipment during testing.

Calculations & efficiency: Methods to calculate electrical input, flow rates, fuel/steam/hydrogen energy, and overall hydrogen generator efficiency (informative annex explaining definitions).

Reporting: Summary, detailed and full report templates and informational annexes (symbols, uncertainty guidance, fuel heating value, reference gas).

Practical applications

Performance verification during development and factory acceptance testing.

Comparative benchmarking of hydrogen generator products.

Commissioning and acceptance testing for stationary hydrogen supply systems (e.g., fuel cell power plants, hydrogen fueling stations).

Supporting certification, procurement and lifecycle energy accounting by providing consistent, auditable performance data.

Related standards (selected)

ISO 16110-1 (Safety)

ISO 14687-1 / ISO 14687-2 (Hydrogen fuel specifications)

ISO 6974 / ISO 6975 (Natural gas composition analysis)

IEC 61010-1 (Electrical measurement safety)

Using ISO 16110-2:2010 helps ensure consistent, reproducible performance data for hydrogen generators, enabling reliable comparisons, safer commissioning and better energy‑efficiency assessment for hydrogen production systems.

ISO 16110-2:2010 PDF

Abstract

Похожие стандарты

Overview - ISO 16110-2:2010 (Hydrogen generators | Test methods for performance)

Key technical topics and requirements

Practical applications

Who uses this standard

Related standards (selected)

Технические детали

SIST EN ISO 6974-3:2019

Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 3: Precisi…

SIST EN ISO 6975:2005

Natural gas - Extended analysis - Gas-chromatographic method (ISO 6975:1997)

BS ISO 16110-1:2007

Hydrogen generators using fuel processing technologies. Safety.

ISO 14687-1:1999

Hydrogen fuel — Product specification — Part 1: All applications except proton exchange membrane (PEM) fuel c…

BS ISO 14687:2025-TC

Tracked Changes. Hydrogen fuel quality. Product specification.

BS IEC 61010-3-1:1997

Safety requirements for electrical equipmentfor measurement, control, and laboratory use - Conformity verific…