ISO 16119-3:2013 PDF
Agricultural and forestry machinery — Environmental requirements for sprayers — Part 3: Sprayers for bush and tree crops
Agricultural and forestry machinery — Environmental requirements for sprayers — Part 3: Sprayers for bush and tree crops
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 12
- Дата публикации:
- 26 февраля 2013 г.
- Издание:
- ISO IS 16119 edition 1 version 1
- ICS:
- 65.060.40
ISO 16119-3:2013 specifies requirements and the means for their verification for the design and performance of sprayers for bush, tree and similar crops, as defined in 3.1, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer.It is not applicable to human-mounted sprayers for bushes or trees. It is intended to be used with ISO 16119-1, which gives general requirements common to all the sprayer types covered by ISO 16119. It does not cover safety aspects (see ISO 4254-6). ISO 16119-3:2013 is not applicable to sprayers manufactured before the date of its publication.
Abstract
Overview
ISO 16119-3:2013 - Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops - specifies environmental performance and verification requirements for sprayers used on bush, tree and similar crops (e.g., grapes, fruit, hops). It focuses on measures to minimize the risk of environmental contamination during normal use and foreseeable misuse. This part is intended to be used together with ISO 16119-1 (General), does not cover human-mounted sprayers, and excludes safety aspects (see ISO 4254-6).
Key topics and technical requirements
The standard addresses design and performance features that reduce contamination risk. Key technical topics include:
- Spray tank design
- Internal/external surface roughness limited (Rz ≤ 100 µm).
- Tank nominal volume rules (tank volume ≥ nominal + 5%); nominal volumes >200 L to be multiples of 100 L.
- Filling devices that prevent backflow and comply with ISO 9357 for filling hole diameter.
- Strainers installed in filling openings (mesh
Технические детали
- Технический комитет
- ISO/TC 23/SC 6 - Equipment for crop protection
- SKU
- ISO 16119-3:2013
Похожие стандарты
Стандарты, упомянутые в описании