ISO 16293-3:2017 PDF

Name: ISO 16293-3:2017 — Glass in building — Basic soda lime silicate glass products — Part 3: Polished wired glass
SKU: ISO 16293-3:2017
Price: 25 EUR
Availability: InStock

Glass in building — Basic soda lime silicate glass products — Part 3: Polished wired glass

Название (английский):

ISO 16293-3:2017

Glass in building — Basic soda lime silicate glass products — Part 3: Polished wired glass

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 10
Дата публикации:: 30 марта 2017 г.
Издание:: ISO IS 16293 edition 1 version 1
ICS:: 81.040.20

Тип поставки:

Full version150 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:150 €

Описание (английский):

ISO 16293-3:2017 specifies dimensional and minimum quality requirements (in respect of optical, visual and wire faults) for polished wired glass, as defined in ISO 16293‑1, for use in building. ISO 16293-3:2017 applies only to polished wired glass supplied in rectangular panes, in stock sizes and final cut sizes.

Abstract

Похожие стандарты

Другие стандарты ISO

Overview

ISO 16293-3:2017 - "Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass" specifies dimensional and minimum quality requirements for polished wired glass used in building applications. The standard applies only to rectangular panes (stock sizes and final cut sizes) and covers tolerances, wire-mesh characteristics, inspection methods and acceptance criteria for optical faults, visual faults and wire faults.

Key topics and technical requirements

Scope and product type

Applies to polished wired soda‑lime silicate glass supplied in rectangular panes.

Dimensional requirements

Thickness measured as the average of four readings (one at each side) to 0.01 mm; rounded limits given for nominal 7 mm and 10 mm thicknesses.
Tolerances on length and width: ±4 mm.
Squareness controlled by limits on diagonal differences (vary by pane size).

Wire mesh

Wire diameter: ≥ 0.42 mm.
Mesh dimensions: maximum 16 mm for square pattern, 32 mm for diamond pattern.
Parallel strand spacing: 45–55 mm; all intersections must be welded.

Quality requirements and inspection

Two inspection regimes: optical faults (distortions seen through the glass) and visual faults (spot, elongated/linear or wire-related faults).
Optical inspection setup: pane placed 1 m from strip lights, observer 1 m away.
Visual inspection setup: pane viewed at 2 m in front of a matt black screen under diffuse daylight conditions.
Acceptance: no disturbing optical distortions allowed. Detailed numeric acceptance limits are provided for spot and elongated faults depending on size and distance from the wire.

Wire faults

Limits for deviations (out of square/out of parallel, waviness, bow): typically 16 mm per metre or specified ratios for diamond mesh.
No penetrations of the glass surface by wire and no wire breaks are acceptable.

Edge defects (final cut sizes)

Limits on entrant/emergent faults and bevels expressed relative to glass thickness (e.g., bevel ratio d/e

ISO 16293-3:2017 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Технические детали

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

ISO/ASTMTR52917-EB

Additive Manufacturing — Round Robin Testing — General Guidelines

ISO/ASTM52901-17(2023)

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts