ISO 16545:2012 PDF

Name: ISO 16545:2012 — Thermal insulating products for building applications — Determination of behaviour under cyclic loading
SKU: ISO 16545:2012
Price: 25 EUR
Availability: InStock

Thermal insulating products for building applications — Determination of behaviour under cyclic loading

Название (английский):

ISO 16545:2012

Thermal insulating products for building applications — Determination of behaviour under cyclic loading

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 8 мая 2012 г.
Издание:: ISO IS 16545 edition 1 version 1
ICS:: 91.100.60

Тип поставки:

Full version120 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

This International Standard specifies equipment and procedures for determining behaviour of test specimens under cyclic loading conditions. It is applicable to thermal insulating products. The selection of the conditions of the test are derived from the specific requirements of the intended application.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 16545:2012 specifies equipment, procedures and reporting for determining the behaviour of thermal insulating products for building applications when subjected to cyclic (repetitive) compressive loading. The standard measures vertical deformation and relative deformation of test specimens under a defined cyclic stress waveform and records force–displacement behaviour. Test conditions (stress levels, frequency, number of cycles and conditioning) are selected according to the intended application.

Key topics and technical requirements

Scope: Applies to thermal insulating products for buildings; test conditions are derived from the product’s intended use.

Principle: Measurement of vertical deformation of specimens under repetitive load cycles (sinusoidal load assumed).

Apparatus:

Compression testing machine with two rigid, polished parallel plates (one fixed, one movable, ball joint allowed).
Displacement measurement permitting continuous reading to ±5 % or ±0.1 mm (whichever is smaller).
Force sensor permitting continuous reading to ±3 %; sensor deformation must be negligible or compensated.
Recording device to provide F vs X (force vs displacement) curves.

Load waveform: Cyclic (sine-like) with permitted deviation from ideal sine ≤5 % of cycle duration.

Test specimens:

Use original product thickness; do not layer specimens.
Typical square specimen sizes: 50×50, 100×100, 150×150, 200×200, 300×300 mm (product standard specifies choice).
Dimensional tolerances: linear dimensions per ISO 29768 (±0.5 %); flatness/parallelism ≤0.5 % of side (max 0.5 mm).
Number of specimens: as per product standard or, if unspecified, five per stress level.

Conditioning: Minimum storage 6 h at (23 ± 5) °C; in disputes use (23 ± 2) °C and (50 ± 5) % RH or follow product-specific conditioning. (Note: clauses on conditioning, test conditions and reporting were modified for tropical conditions.)

Results & reporting: Vertical deformation, relative deformation, F–X curves and test parameters. Detailed test report requirements are specified.

Applications and users

ISO 16545 is used to assess mechanical durability and compressive performance of insulation products under repetitive loading such as flooring, roofing or façade systems. Typical users:

Third‑party testing laboratories and quality control departments

Insulation manufacturers for product development and compliance

Architects, specifiers and façade/flooring system designers evaluating long‑term mechanical behavior

Certification and regulatory bodies assessing product suitability for intended service conditions

Related standards

ISO 29469 (compression behaviour)

ISO 29768 (linear dimensions of test specimens)

ISO 16545 adopted from EN 13793; related ISO/EN test-method series for thermal insulating products (e.g., EN 1602, EN 1603, EN 1604)

Keywords: ISO 16545, thermal insulating products, cyclic loading, compression testing, building applications, test specimens, displacement measurement, force measurement.

ISO 16545:2012 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

BS EN ISO 29768:2022

Thermal insulating products for building applications. Determination of linear dimensions of test specimens.

SIST EN ISO 29469:2023

Thermal insulating products for building applications - Determination of compression behaviour (ISO 29469:202…

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies